FAQs & Troubleshooting
Popular |
94 Results
- 1How to Embroider on Pet Collar. [Video instructions]
- 2How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 3How to Embroider on Clothes. [Video instructions]
- 4There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 5How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 6How to set up the cap frame. [Video instructions]
- 7How to use the the versatile magnetic frame [Video instructions]
- 8How to Embroider on Bag. [Video instructions]
- 9Maintenance (Oiling the machine) [ Video ]
- 10Maintenance (Clean the hook) [ Video ]
- 11How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 12How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 13How to Embroider on Cap. [Video instructions]
- 14When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 15Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 16Maintenance (Cleaning around the needle plate) [ Video ]
- 17How to use the Round frame (PRPRFK1) [Video instructions]
- 18How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 19How to Embroider on Shoes. [Video instructions]
- 20Hooping the Fabric
- 21Maintenance (Oiling the machine)
- 22How do I install the bobbin wound with thread?
- 23Stabilizers (Backing)
- 24Maintenance (Cleaning the bobbin case) [ Video ]
- 25Maintenance (Clean the hook)
- 26Fabric and Thread
- 27Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 28How do I create a space between characters?
- 29How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 30"Cannot communicate between PC and machine. Please check the USB cable connections to run the Link application." message appears on the LCD. What does it mean?
- 31How to set up the cap frame driver. [Video instructions]
- 32How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 33Embroidery
- 34"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 35"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 36"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
- 37How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 38How do I change the volume of operation sounds or alarm sounds?
- 39Maintenance (Cleaning the thread paths of the upper threads)
- 40When thread got tangled
- 41"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
- 42"Please UNLOCK to use the Thead Trimmer." message appears on the LCD. What does it mean?
- 43"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
- 44"This pattern cannot combine." message appears on the LCD. What does it mean?
- 45"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
- 46"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 47Maintenance (Cleaning around the needle plate)
- 48"Not enough space. Delete some patterns or use a different USB media." message appears on the LCD. What does it mean?
- 49"Picker error" message appears on the LCD. What does it mean?
- 50"Stop while needle bar case transferring." message appears on the LCD. What does it mean?