FAQs & Troubleshooting
Popular |
300 Results
- 1Mat and Material Combinations
- 2Mat and Cutting Blade Combinations
- 3Adjusting the Blade Extension
- 4About Blade Extension, Cutting Pressure and Mat
- 5Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 6List of Error Messages for CanvasWorkspace (Others)
- 7Downloading Optional Design Pattern Collection
- 8How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
- 9List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 10Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 11List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
- 12FC1 files on USB flash drives of optional patterns cannot be imported into CanvasWorkspace.
- 13What should I do if the scanned and cut positions are misaligned?
- 14Can I create the cutting data for ScanNCut from the image data?
- 15How do I Scan for Cutting (Direct Cut) ?
- 16The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 17The mat or the material catches on a feed roller during cutting/drawing.
- 18Support OS Information about ScanNCut Link Plug-in for Adobe® Illustrator®
- 19ErrS09 appears on the computer screen.
- 20If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 21Can I create the cutting data for ScanNCut from vector graphics data?
- 22What type of data can my ScanNCut machine be used?
- 23How to Calibrate the LCD Touchscreen Display
- 24ErrS23 appears on the computer screen.
- 25What should I do if I change the size (enlarge/reduce) of the Disney Pattern downloaded?
- 26E00011 appears on the computer screen.
- 27How to Install and Uninstall the Holder
- 28The machine is turned off (Auto Shut Down).
- 29I adjust the blade extension and the cut pressure to the setting described in the Quick Reference Guide. But the result of cutting the material was not good.
- 30The 12" × 24" (305 mm × 610 mm) mat cannot be used with scanning function.
- 31Scanning a Background Image (Background Scanning).
- 32Replacing the Blade
- 33E11010 appears on the computer screen.
- 34ErrS01 appears on the computer screen.
- 35What type of cut files and projects containing cut data other than built-in patterns are available?
- 36E12002 appears on the computer screen.
- 37Preparation of Craft Paper / Fabric
- 38The mat is fed in at an angle and is not fed during cutting / drawing.
- 39ErrS51 appears on the computer screen.
- 40ErrS10 appears on the computer screen.
- 41E92002 appears on the computer screen.
- 42Can rough material be cut?
- 43Can different types of material be attached to the same mat for cutting?
- 44The Calligraphy Font in the USB Flash Drive is Not Displayed
- 45Replacement Criteria
- 46There are deep cuts completely through the mat.
- 47How do I Cut Around Drawings?
- 48How do I Create the Cutting Data (Scan to Cut Data) ?
- 49Not all of the material to be cut is cut. Some areas remain uncut.
- 50ErrS99 appears on the computer screen.