FAQs & Troubleshooting
Popular |
126 Results
- 51How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 52How to use the Ruffler Foot. (Optional accessory : SA143 / F051) [Video instructions]
- 53How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 54How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 55How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
- 56How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 57"This pattern cannot be used with this machine." message appearing on the LCD. What does it mean and how do I clear it?
- 58"OK to automatically lower the presser foot?" message appearing on the LCD. What does it mean and how do I clear it?
- 59How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 60How do I correctly install a bobbin?
- 61"The needle is down. Press the needle position button to raise the needle." message appears on the LCD. What does it mean?
- 62How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 63How do I thread my machine for use with the twin needle option?
- 64"No more than 12 patterns can be used. Reduce the number of patterns used." message appearing on the LCD. What does it mean and how do I clear it?
- 65"Can not change the configuration of the characters." message appearing on the LCD. What does it mean and how do I clear it?
- 66How do I sew an applique?
- 67How do I sew such as vinyl, leather, quilting layers and velvet?
- 68How do I thread my machine (Threading the upper thread)?
- 69How do I wind the bobbin?
- 70"Before embroidering, make sure embroidery frame is moved as far back as possible and the frame-securing lever is locked down. Then, press "Start/Stop" button to embroidery." message appearing on the LCD. What does it mean and how do I clear it?
- 71"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 72"The bobbin winder safety device has activated. Is the thread tangled?" message appearing on the LCD. What does it mean and how do I clear it?
- 73"Remove the embroidery frame." message appears on the LCD. What does it mean?
- 74"Raise the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
- 75"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 76Why does the upper thread keep breaking?
- 77Why is the outline sewing off the pattern?
- 78Why does the needle keep breaking?
- 79How do I sew a blind hem?
- 80How do I save often-used patterns in the machine's memory?
- 81How do I manually thread the needle?
- 82"Lower the presser foot lever." appears on the LCD.
- 83"This pattern cannot be used since it exceeds the data capacity." message appearing on the LCD. What does it mean and how do I clear it?
- 84"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appearing on the LCD. What does it mean and how do I clear it?
- 85"The bobbin thread is almost empty." message appearing on the LCD. What does it mean and how do I clear it?
- 86"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?
- 87"Lower the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
- 88"Finish editing the pattern before sewing the pattern." message appears on the LCD. What does it mean?
- 89"Use the presser foot lifter button to lower the presser foot." message appearing on the LCD. What does it mean and how do I clear it?
- 90Why does my thread keep jamming?
- 91"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 92Does my machine support Windows Vista/ Windows7?
- 93"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?
- 94"Retrieving the pattern. Wait a moment." message appearing on the LCD. What does it mean and how do I clear it?
- 95"Attach the embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
- 96"Change to the extra large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
- 97"No more patterns can be added to this combination." message appearing on the LCD. What does it mean and how do I clear it?
- 98For better results when sewing stretch fabrics
- 99To use your machine connected to the PC of Windows Vista/ Windows7
- 100How do I thread the needle?