FAQs & Troubleshooting
Popular |
94 Results
- 1How to set up the cap frame. [Video instructions]
- 2How to set up the cap frame driver. [Video instructions]
- 3Color thread table
- 4Why does the needle keep breaking?
- 5Colors of Tajima (.dst) embroidery data
- 6There is puckering in the fabric.
- 7How do I resume embroidering after turning off the machine ?
- 8Maintenance (Cleaning around the needle plate)
- 9LED pointer does not indicate the position correctly.
- 10"Picker error" message appears on the LCD. What does it mean?
- 11How do I thread the machine? (Threading the upper thread)
- 12Embroidery pattern does not sew out correctly.
- 13"This function cannot be used when patterns are overlapping." message appears on the LCD. What does it mean and how do I clear it?
- 14"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 15Why does the upper thread keep breaking?
- 16"Preventive maintenance is recommended" appears on the LCD.
- 17The needle threader cannot be used.
- 18There are needle cuts or holes in the garment.
- 19The machine is noisy while embroidering.
- 20The bobbin thread breaks.
- 21"OK to delete the selected pattern?" message appears on the LCD.What does it mean?
- 22"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 23"This pattern cannot be used." message appears on the LCD. What does it mean?
- 24"This file cannot be used." message appears on the LCD. What does it mean?
- 25"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
- 26"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 27"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 28How do I embroider on small pieces of fabric ?
- 29How do I adjust the tension of the upper thread ?
- 30Maintenance (Oiling the machine)
- 31Maintenance (Cleaning the thread paths of the upper threads)
- 32How do I install the bobbin wound with thread?
- 33Stabilizers (Backing)
- 34When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 35How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 36The thread tension is incorrect.
- 37Stitches are skipped.
- 38Nothing happens, even if the LCD display is pressed.
- 39Bobbin thread does not wind neatly on the bobbin.
- 40Upper thread tightened up.
- 41Although the thread is not broken, a broken thread error occurs and the machine stops.
- 42The upper thread does not reach the bobbin thread when embroidering begins.
- 43Loops appear on the surface of the fabric when embroidering.
- 44"Wiper error." message appears on the LCD. What does it mean and how do I clear it?
- 45"Trimming sensor error." message appears on the LCD. What does it mean?
- 46"This USB media is incompatible." message appears on the LCD. What does it mean and how do I clear it?
- 47"This USB media cannot be used." message appears on the LCD. What does it mean?
- 48"This pattern cannot combine." message appears on the LCD. What does it mean?
- 49"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 50"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?