FAQs & Troubleshooting
 |
Popular |
94 Results
- 1How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 2How to set up the cap frame driver. [Video instructions]
- 3How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 4How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 5How to Embroider on Shoes. [Video instructions]
- 6How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 7Maintenance (Oiling the machine)
- 8Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 9Maintenance (Clean the hook) [ Video ]
- 10How to use the Round frame (PRPRFK1) [Video instructions]
- 11How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 12How to set up the cap frame. [Video instructions]
- 13How to Embroider on Cap. [Video instructions]
- 14"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 15"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
- 16"Change to a larger embroidery frame." message appears on the LCD. What does it mean?
- 17How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 18"Needle threader is in threading position." message appears on the LCD. What does it mean?
- 19When thread got tangled
- 20How do I install the bobbin wound with thread?
- 21"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
- 22"This USB media cannot be used." message appears on the LCD. What does it mean?
- 23"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 24"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 25Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 26Maintenance (Cleaning the thread paths of the upper threads)
- 27Maintenance (Cleaning around the needle plate)
- 28Maintenance (Clean the hook)
- 29"Picker error" message appears on the LCD. What does it mean?
- 30"Needle bar case home position error." message appears on the LCD. What does it mean?
- 31Fabric/stabilizer compatibility chart
- 32"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 33How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 34How to use the the versatile magnetic frame [Video instructions]
- 35"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
- 36"Remove the embroidery positioning mark." message appears on the LCD. What does it mean?
- 37"Please UNLOCK to use the Thead Trimmer." message appears on the LCD. What does it mean?
- 38"Please go to either Embroidering Screen or Embroidering Settings Screen to use the Thread Trimmer." message appears on the LCD. What does it mean?
- 39"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 40"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 41"Can't use this key during camera mode." message appears on the LCD. What does it mean?
- 42"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
- 43"Can not find the positioning mark, please set the frame to the previous position." message appears on the LCD. What does it mean?
- 44"Please make sure the PC is connected to the machine via the USB cable to run the Link application." message appears on the LCD. What does it mean?
- 45"Please set up the "Thread antenna"" message appears on the LCD. What does it mean?
- 46"Cannot communicate between PC and machine. Please check the USB cable connections to run the Link application." message appears on the LCD. What does it mean?
- 47"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 48"Trimming sensor error." message appears on the LCD. What does it mean?
- 49"This pattern cannot combine." message appears on the LCD. What does it mean?
- 50"This pattern cannot be used." message appears on the LCD. What does it mean?
