FAQs & Troubleshooting
Popular |
94 Results
- 1How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 2How to Embroider on Cap. [Video instructions]
- 3How to use the the versatile magnetic frame [Video instructions]
- 4How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 5How to Embroider on Pet Collar. [Video instructions]
- 6Maintenance (Cleaning around the needle plate) [ Video ]
- 7How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 8Maintenance (Oiling the machine) [ Video ]
- 9How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 10How to use the Round frame (PRPRFK1) [Video instructions]
- 11How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 12"This pattern cannot combine." message appears on the LCD. What does it mean?
- 13Maintenance (Clean the hook)
- 14"Please UNLOCK to use the Thead Trimmer." message appears on the LCD. What does it mean?
- 15"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 16"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
- 17"Please make sure the PC is connected to the machine via the USB cable to run the Link application." message appears on the LCD. What does it mean?
- 18How do I thread the machine? (Threading the upper thread)
- 19How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 20"Can't use this key during camera mode." message appears on the LCD. What does it mean?
- 21"OK to cancel embroidering?" message appears on the LCD. What does it mean?
- 22How to Embroider on Bag. [Video instructions]
- 23"Picker error" message appears on the LCD. What does it mean?
- 24"The pattern is too large for the extra large embroidery frame." message appears on the LCD. What does it mean?
- 25"Can not find the positioning mark, please set the frame to the previous position." message appears on the LCD. What does it mean?
- 26"This pattern cannot be used." message appears on the LCD. What does it mean?
- 27"There is a pattern included that cannot be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 28Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 29Maintenance (Cleaning the bobbin case) [ Video ]
- 30Maintenance (Oiling the machine)
- 31"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
- 32"Please go to either Embroidering Screen or Embroidering Settings Screen to use the Thread Trimmer." message appears on the LCD. What does it mean?
- 33"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
- 34"Please set up the "Thread antenna"" message appears on the LCD. What does it mean?
- 35"This USB media cannot be used." message appears on the LCD. What does it mean?
- 36"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 37"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 38"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 39"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 40Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 41"OK to delete the selected picture?" message appears on the LCD. What does it mean?
- 42Maintenance (Cleaning the thread paths of the upper threads)
- 43"The USB media is write-protected so the data cannot be saved. Cancel the write-protection before trying to save the data." message appears on the LCD. What does it mean?
- 44"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 45"Remove the embroidery positioning mark." message appears on the LCD. What does it mean?
- 46"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 47"Cannot communicate between PC and machine. Please check the USB cable connections to run the Link application." message appears on the LCD. What does it mean?
- 48"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 49"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 50"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?