FAQs & Troubleshooting
![]() |
Popular |
142 Results
- 51How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 52How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 53How to use the Round frame (PRPRFK1) [Video instructions]
- 54Data cannot be saved to the machine
- 55Multiple data cannot be transferred to the machine at once
- 56Data cannot be transferred even though the machine number has been input. (M5622201)
- 57There is no machine that can be transferred
- 58How to link accounts
- 59How to change the displayed language
- 60How to disconnect the machine from Artspira using the Artspira app
- 61How to connect your machine and transfer data to Artspira
- 62About the contents and data treated by Artspira app
- 63Introducing the Brother Artspira application
- 64M6331001 appears on the Artspira app screen.
- 65M5622201 appears on the Artspira app screen.
- 66M5541001 appears on the Artspira app screen.
- 67M4452001 appears on the Artspira app screen.
- 68M4341001 appears on the Artspira app screen.
- 69M2513631 appears on the Artspira app screen.
- 70M2102501 appears on the Artspira app screen.
- 71M1332002 appears on the Artspira app screen.
- 72"The SSID and Network Key are incorrect." message appears on the LCD. What does it mean?
- 73"Cannot connect to the PC. Please check the network connection." message appears on the LCD. What does it mean?
- 74Tutorial videos on how to use My Stitch Monitor with the machine [Video instructions]
- 75The App shows the message "No Supported Machines Found".
- 76"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
- 77"Remove the embroidery positioning mark." message appears on the LCD. What does it mean?
- 78"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
- 79"Can't use this key during camera mode." message appears on the LCD. What does it mean?
- 80"Can not find the positioning mark, please set the frame to the previous position." message appears on the LCD. What does it mean?
- 81"The wireless security information (Authentication method, Encryption method, Network Key) is incorrect." message appears on the LCD. What does it mean?
- 82"The authentication and encryption methods used by the selected wireless LAN access point/router are not supported by your machine." message appears on the LCD. What does it mean?
- 83"The wireless LAN access point/router cannot be detected. " message appears on the LCD. What does it mean?
- 84"Please set up the "Thread antenna"" message appears on the LCD. What does it mean?
- 85"Go to Embroidering Screen and press the unlock key." message appears on the LCD. What does it mean?
- 86How do I delete short stitches ?
- 87The needle threader cannot be used.
- 88Nothing happens, even if the LCD display is pressed.
- 89There are needle cuts or holes in the garment.
- 90Although the thread is not broken, a broken thread error occurs and the machine stops.
- 91The machine is noisy while embroidering.
- 92Loops appear on the surface of the fabric when embroidering.
- 93The bobbin thread breaks.
- 94"Wiper error." message appears on the LCD. What does it mean and how do I clear it?
- 95"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 96"Trimming sensor error." message appears on the LCD. What does it mean?
- 97"This pattern cannot combine." message appears on the LCD. What does it mean?
- 98"This pattern cannot be used." message appears on the LCD. What does it mean?
- 99"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 100"This file cannot be used." message appears on the LCD. What does it mean?