FAQs & Troubleshooting
Popular |
53 Results
- 1How to install the Mac driver via USB/ Wi-Fi®/ wired network
- 2The left or right side of the label is not printed correctly.
- 3I cannot install the Windows driver.
- 4Enable or disable Bluetooth Low Energy (BLE)
- 5How to add a new stock from the Seagull driver
- 6How to change the printer code page
- 7How to set Bluetooth Local Name or PIN code using the BPM (Brother Printer Management Tool) (for Windows)
- 8How to calibrate the Gap/Black Mark Sensor by directly operating the printer
- 9My printed documents are incomplete or a blue screen appears when printing after a Windows 10 update (March 2021)
- 10I cannot pair the printer with a Bluetooth® device as my iOS / iPadOS device reconnects to the printer automatically.
- 11How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)
- 12How to get Bluetooth MAC Address with the CommTool (for Windows)
- 13How to update the firmware
- 14How to install the Roll Spacer Set (Optional)
- 15How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)
- 16Printing is not possible.
- 17Using the CommTool (for Windows)
- 18How to connect the printer to your computer (for Windows)
- 19How to install the Windows driver via Bluetooth®
- 20Will my printer automatically turn itself off?
- 21BarTender UltraLite Edition 2021 (BarTender Designer for Brother) displays the error #1401 during printing.
- 22I don't know the Product Key Code for BarTender UltraLite Edition 2021 (BarTender Designer for Brother).
- 23How to execute the printer configuration (Self-test) to debug
- 24I can no longer print from my computer via Bluetooth®, even though I was able to print previously.
- 25How to transfer the print programs or templates using FBPL commands
- 26I cannot print correctly using the Windows printer driver
- 27The print quality is poor.
- 28How do I clean / maintain my printer?
- 29I cannot automatically connect the printer to my iOS/iPadOS device via Bluetooth®.
- 30How to get an alert log file using the BPM (Brother Printer Management Tool) (for Windows)
- 31How to update firmware to all printers on the same subnet at the same time
- 32How to clean the Platen Roller
- 33I cannot automatically reconnect my iPhone 11 to the printer via Bluetooth®.
- 34How to clean the Print Head
- 35How to install Brother software on a computer not connected to the Internet
- 36How to open the Devices and Printers window
- 37Where can I find the printer's network settings, such as IP address?
- 38How to adjust the tear position in BarTender
- 39How to identify your Operating System (OS) for Windows or Mac
- 40When I print a long label or many labels continuously, printing stops suddenly before finishing.
- 41How to adjust the printout position
- 42How do I connect the printer and my mobile device via Bluetooth®?
- 43Printed barcodes cannot be read.
- 44How do I uninstall the printer driver?
- 45The printer does not turn on when I press the Power button.
- 46The linerless roll is jammed inside the printer and not ejected correctly.
- 47How to change the speed and density in BarTender
- 48I cannot print with ESC/POS commands or CPCL commands
- 49The printed label contains gray lines.
- 50I cannot print barcodes correctly using BarTender.