FAQs & Troubleshooting
Popular |
225 Results
- 1Print as a Poster (Windows)
- 2Reset the Drum Counter
- 3Print on Both Sides of the Paper Automatically (Automatic 2-sided Printing)
- 4(Video) Replace the Toner Cartridge
- 5I cannot connect to the printer via Wi-Fi Direct using the Brother Print Service Plugin (Android™ 12 or later).
- 6Factory Reset
- 7Setup a Brother machine on a wireless (Wi-Fi) network.
- 8Calibrate Color Output
- 9My Brother machine could not be found over the network when I installed drivers on my computer.
- 10The error message "No Supported Devices Found" appears on the Brother iPrint&Scan screen (mobile device).
- 11I still receive the error message "Replace Drum", "Drum End Soon" or "Drum Stop" after I replace the drum unit with a new one.
- 12Brother iPrint&Scan cannot find my Brother machine (macOS)
- 13Set up your Brother machine on a wireless network.
- 14Update your machine's firmware using Brother iPrint&Scan (Android/iOS)
- 15Reduce Printing Noise
- 16Size Error DX or Size Error 2-sided
- 17No Toner
- 18I cannot install Brother drivers on Debian 10 or later (Linux)
- 19I cannot print using my Brother machine on a wireless network (Mac)
- 20Paper is Jammed in the Back of the Machine
- 21Replace the Drum Unit
- 22What can happen if the wrong paper is used in your machine.
- 23Add your Brother machine with AirPrint (macOS)
- 24Machine Reset
- 25Install a Certificate on Your Brother Machine
- 26What is Brother iPrint&Scan?
- 27No Paper / No Paper T1
- 28(Video) Load an Envelope (Manual Feed Slot)
- 29Adjust color settings by using the custom setting in the printer driver
- 30Paper is Jammed in the Paper Tray
- 31Replace Fuser
- 32Enable the Brother machine's network interface.
- 33Clean the Drum Unit
- 34Wrinkled printout
- 35I cannot repair the wired or wireless connection using the Network Connection Repair Tool (Windows)
- 36Check the remaining ink or toner level (Linux)
- 37Set up a Brother machine and your mobile device on a wireless network
- 38Create a Certificate Signing Request (CSR)
- 39(Video) Unpack your Brother machine
- 40Replace the Belt Unit
- 41How to identify your Operating System (OS).
- 42Load and Print Paper in the Manual Feed Slot
- 43Registration or Registration failed.
- 44The color of your printouts is not what you expected
- 45Reset the Network Settings to the Factory Settings
- 46Reduce Toner Consumption
- 47I'm using SuSE11.2. I cannot print to Brother monochrome machines. (Linux)
- 48I updated my Windows 11 PC through Windows Update and I can no longer Print, Scan or Fax from my PC.
- 49Print or scan using the Brother iPrint&Scan application for mobile devices (Android/iOS)
- 50(Video) Set up your Brother machine