FAQs & Troubleshooting
Popular |
39 Results
- 1Setting up the sewing machine [Video instructions]
- 2How do I sew with the twin needle?
- 3Where do I put the oil in my machine?
- 4How do I install the bobbin wound with thread? (For models equipped with a quick-set bobbin)
- 5Incorrect thread tension
- 6Replacing the needle [Video instructions]
- 7Upper threading [Video instructions]
- 8How do I change the needle ?
- 9How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 10How do I clean the machine? (Cleaning the race)
- 11Zipper insertion [Video instructions]
- 12Buttonhole sewing [Video instructions]
- 13Satin Stitching [Video instructions]
- 14Fabric and Thread
- 15How do I remove or attach the presser foot ?
- 16How do I thread my machine?
- 17How do I wind the bobbin?
- 18Combination of fabric, thread and needle
- 19Basic operations and sewing [Video instructions]
- 20Maintenance [Video instructions]
- 21Winding the bobbin and lower thread setting [Video instructions]
- 22How do I draw up the lower thread?
- 23How do I sew such as vinyl, leather, quilting layers and velvet?
- 24Can I lower the feed dogs so that my machine doesn't feed fabric automatically?
- 25Tangled thread on wrong side of fabric
- 26Upper thread tightened up
- 27When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 28Why does the needle keep breaking?
- 29The bobbin thread cannot be pulled up.
- 30The machine does not make stitches
- 31How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 32How do I remove or attach the presser foot holder?
- 33Fabric is caught in the machine and cannot be removed
- 34Thread tension [Video instructions]
- 35Reverse sewing [Video instructions]
- 36Start sewing [Video instructions]
- 37How do I draw up the lower thread by hand? (For models equipped with a quick-set bobbin.)
- 38How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 39Why does the lower thread keep breaking?