FAQs & Troubleshooting
Popular |
64 Results
- 1How do I create a space between characters?
- 2Combination of fabric, thread and needle
- 3How to I attach the spool of thread to my machine?
- 4How do I thread the needle?
- 5"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 6How do I clean the race?
- 7How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 8Upper Threading (Using the twin needle)
- 9When should I use the extra spool pin?
- 10"No more stitches can be combined." message appearing on the LCD. What does it mean?
- 11"Delete the selected pattern." appears on the LCD.
- 12"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 13How do I wind the bobbin?
- 14Fabric and Thread
- 15How do I load the spool into the thread cassette?
- 16"Saved on another embroidery card." appears on the LCD.
- 17"Saving..." message appearing on the LCD. What does it mean?
- 18"Press the back key to return to the screen to sew." appears on the LCD.
- 19When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 20Why does my thread keep jamming?
- 21My auto threader is not working. What should I do?
- 22Place a spool of thread on a spool pin.
- 23"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 24"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 25"This button does not operate when the embroidery unit is not attached." message appearing on the LCD. What does it mean?
- 26"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 27"Twin needles can not be used for this pattern." appears on the LCD.
- 28"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 29Why does the upper thread keep breaking?
- 30How do I sew buttonholes?
- 31Incorrect thread tension
- 32Where do I put the oil in my machine?
- 33How do I manually thread the needle?
- 34"Lower the presser foot lever." appears on the LCD.
- 35It is difficult to pass the thread through the needle bar thread guide(hook).
- 36When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 37"Saved on an embroidery card." appears on the LCD.
- 38"Turn off the power and insert an embroidery card." appears on the LCD.
- 39"Calculating the time required... Please wait." appears on the LCD.
- 40"This embroidery pattern can not be used on this machine." appears on the LCD.
- 41"Press needle position button to raise needle." appears on the LCD.
- 42"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 43"Selected a pattern." appears on the LCD.
- 44"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 45"Change to the single needle mode." appears on the LCD.
- 46"Lower the buttonhole lever." appears on the LCD.
- 47"Lift the buttonhole lever." appears on the LCD.
- 48"Disconnect the foot control." appears on the LCD.
- 49"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 50"Insert thread cassette." message appearing on the LCD. What does it mean?