Can a pattern for the roll feeder be created with CanvasWorkspace(Web)?

How should I make a pattern to be cut with the roll feeder?

Cutting data is not displayed in Roll Feeder.

Can the cutting machine transfer a pattern with a USB cable?

How to Use the Roll Feeder Function [Video]

Instructions for sending patterns created in CanvasWorkspace to the cutting machine via a Wireless Network [Video]

Instructions for sending patterns created in CanvasWorkspace to the cutting machine via a USB Cable [Video]

Overview of the Online Content Viewer [Video]

How to Import My Project to CanvasWorkspace [Video]

Changing and Deleting CanvasWorkspace login ID that is registered to your machine with CanvasWorkspace

What is the difference between "CWPRJ" file and "FCM" file? [Video]

Downloading CanvasWorkspace application and Login [Video]

"Please register your machine."  appears on the computer screen.

E00001 appears on the computer screen.

What should I do if I forgot my password for CanvasWorkspace?

“Cannot unload the mat. Pull the mat after turning the machine off.” message appearing on the LCD touchscreen display. What does it mean?

The material was not cut successfully using the half-cut (kiss cut) setting.

The feeder release lever is released. Lock the feeder release lever.” message appears on the LCD touchscreen display. What does it mean?

Overview of the Artboard Panel [Video]

Loading and Unloading the Mat [Video]

"Initialization of the blade position failed. Turn the machine off." message appearing on the LCD.

How to Use the Path Tools [Video]

How to Edit the Path of a Shape [Video]

"Cannot operate when there is no pattern." message appearing on the LCD. What does it mean?

"Cannot operate when there are too many patterns." message appearing on the LCD. What does it mean?

"Built-in memory is corrupted. Initialize the memory." message appearing on the LCD.

"A malfunction occurred. Turn the machine off, then on again." message appearing on the LCD.

Embroidery data (.phc, .pes or .phx files) read from a USB flash drive is not displayed.

Embroidery File Format Readability [Video]

The material slips on the mat when a thick or hard material such as chipboard and grayboard is being cut.

I registered with CanvasWorkspace, but the email did not arrive.

Foil Transfer Starter Kit.  [Video]

How to Use the Layer Panel [Video]

Can multiple cutting machines be registered with CanvasWorkspace?

How do I update the software of the cutting machine?

If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?

Can rough material be cut?

Can different types of material be attached to the same mat for cutting?

Can multiple sheets of material be overlapped and attached to the mat?　

Important Notice for using the Foil Transfer Starter Kit

How Do I Perform Trial Cutting for Roll Feeder? (Test Cut)

What Should I Do If the Trimmer Blade Has Been Removed from the Trimmer?

What Should I Do If the Material is not being Cleanly Cut by the Trimmer Blade?

How to Install the Roll Feeder

Care and Maintenance (Cleaning the Trimmer Blade)

Why is the fabric not cut cleanly?

Can an adhesive craft vinyl sheet be cut?

What types of rolls can be used with the roll feeder (optional accessory)?

Can tape other than masking tape be used to secure materials to the cutting mat?

Can paper be cut with the thin fabric auto blade (beige)?