FAQs & Troubleshooting
![]() |
Popular |
33 Results
- 1How to use the Gathering Foot. (Optional accessory : SA213 / X77459-001) [Video instructions]
- 2How to use the Taping Foot. (Optional accessory : SA212 / X76663-001) [Video instructions]
- 3How to use the Piping Foot. (Optional accessory : SA210 / XB0241-101) [Video instructions]
- 4Oiling
- 5Using the wide table
- 6Needle
- 7To secure chains
- 8Sewing Materials, Threads and Needles Comparison Chart
- 9Needles break
- 10How to use the Blind Stitch Foot. (Optional accessory : SA214 / SA214AP / X76590-002) [Video instructions]
- 11How to set the thread change assembly (Two-thread sewing)
- 12Differential feed adjustment
- 13Free-arm sewing (removing bed extension)
- 14Adjusting the presser foot pressure
- 15Cleaning
- 16Fabric is puckered
- 17Stitches are not uniform
- 18Skipped stitches
- 19The fabric does not feed through.
- 20Threading the left needle
- 21Threading the right needle
- 22Threading the lower looper
- 23Preparation before threading
- 24How to use the Pearls and Sequins Foot. (Optional accessory : SA211 / X76670-002, XB0537-001) [Video instructions]
- 25How to attach and remove the presser foot
- 26How to remove and install the needle
- 27If threads break during sewing
- 28Retracting knife
- 29Threads break
- 30Threading the upper looper
- 31THREADING
- 32How to use the thread spool cap
- 33Adjusting the thread tension dials