FAQs & Troubleshooting
Popular |
99 Results
- 1How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 2How to Embroider on Cap. [Video instructions]
- 3How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 4How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 5Tutorial videos on how to use the machine [Video instructions]
- 6How to set up the cap frame. [Video instructions]
- 7How to Embroider on Bag. [Video instructions]
- 8How to use the the versatile magnetic frame [Video instructions]
- 9"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 10How to Embroider on Clothes. [Video instructions]
- 11Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 12There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 13"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 14"Inappropriate needle stop position" message appears on the LCD. What does it mean?
- 15How to use the Round frame (PRPRFK1) [Video instructions]
- 16"Cannot communicate between PC and machine. Please check the USB cable connections to run the Link application." message appears on the LCD. What does it mean?
- 17"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 18Maintenance (Cleaning the bobbin case) [ Video ]
- 19"Needle threader error" message appears on the LCD. What does it mean?
- 20"Needle case motor has been locked." message appears on the LCD. What does it mean?
- 21"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 22"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 23"Please make sure the PC is connected to the machine via the USB cable to run the Link application." message appears on the LCD. What does it mean?
- 24"Go to Embroidering Screen and press the unlock key." message appears on the LCD. What does it mean?
- 25"Needle bar case home position error." message appears on the LCD. What does it mean?
- 26"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 27"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 28"Press the unlock key to unlock the machine." message appears on the LCD. What does it mean?
- 29How to set up the cap frame driver. [Video instructions]
- 30Maintenance (Cleaning around the needle plate)
- 31"Needle threader is in threading position." message appears on the LCD. What does it mean?
- 32"USB media error" message appears on the LCD. What does it mean?
- 33"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean?
- 34"OK to cancel the current pattern selection?" message appears on the LCD. What does it mean?
- 35How do I check the thread tension ?
- 36The needle threader cannot be used.
- 37"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 38"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 39"Change to a larger embroidery frame." message appears on the LCD. What does it mean?
- 40"The USB media is write-protected so the data cannot be saved. Cancel the write-protection before trying to save the data." message appears on the LCD. What does it mean?
- 41"The USB media is write-protected so the data cannot be deleted. Cancel the write-protection before trying to delete the data." message appears on the LCD. What does it mean?
- 42"Not enough space. Delete some patterns or use a different USB media." message appears on the LCD. What does it mean?
- 43"Needle bar case position error" message appears on the LCD. What does it mean?
- 44Stabilizers (Backing)
- 45"Transmitting by USB" message appears on the LCD. What does it mean?
- 46"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 47"Includes a special pattern that cannot be saved to external memory. Save the pattern in the machine’s memory." message appears on the LCD. What does it mean?
- 48"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 49The upper thread does not reach the bobbin thread when embroidering begins.
- 50The machine is noisy while embroidering.