FAQs & Troubleshooting
![]() |
Popular |
98 Results
- 1Tutorial videos on how to use the machine [Video instructions]
- 2How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 3How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 4Color thread table
- 5How to set up the cap frame. [Video instructions]
- 6How to set up the cap frame driver. [Video instructions]
- 7How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 8How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 9How to use the Round frame (PRPRFK1) [Video instructions]
- 10How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 11What is DST ?
- 12The thread tension is incorrect.
- 13Creating Beautiful Embroidery ( Hooping techniques )
- 14Replacing the hook of the automatic needlethreading mechanism [Video instructions]
- 15When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 16"Preventive maintenance is recommended" appears on the LCD.
- 17Replacing the needle [Video instructions]
- 18There are needle cuts or holes in the garment.
- 19Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 20"This file cannot be used." message appears on the LCD. What does it mean?
- 21"Not enough available memory to save." message appears on the LCD. What does it mean?
- 22Loops appear on the surface of the fabric when embroidering.
- 23"There is a pattern included that cannot be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 24"Change to a larger embroidery frame." message appears on the LCD. What does it mean?
- 25How do I use the embroidery sheet ?
- 26How do I attach Iron-On Stabilizer (Backing) to Fabric ?
- 27Colors of Tajima (.dst) embroidery data
- 28Maintenance (Cleaning the bobbin case)
- 29The bobbin thread breaks.
- 30"OK to delete the selected pattern?" message appears on the LCD.What does it mean?
- 31"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 32"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 33"Press the unlock key to unlock the machine." message appears on the LCD. What does it mean?
- 34"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 35How to select the "Eco Mode" or "Shutoff Support Mode" ?
- 36How do I change the needle?
- 37Maintenance (Oiling the machine)
- 38How do I install the bobbin wound with thread?
- 39Embroidery pattern does not sew out correctly.
- 40Nothing happens, even if the LCD display is pressed.
- 41"This pattern cannot be used." message appears on the LCD. What does it mean?
- 42"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 43"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean and how do I clear it?
- 44"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 45"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 46Maintenance (Clean the hook)
- 47"The USB media is write-protected so the data cannot be deleted. Cancel the write-protection before trying to delete the data." message appears on the LCD. What does it mean?
- 48"Picker error" message appears on the LCD. What does it mean?
- 49Stabilizers (Backing)
- 50Stitches are skipped.