FAQs & Troubleshooting
![]() |
Popular |
132 Results
- 1Tutorial videos on how to use the machine [Video instructions]
- 2Displaying the fabric on the LCD when aligning the embroidering position
- 3Changing the embroidering position and Adjusting the angle
- 4Aligning the embroidering position using the built-in camera
- 5Maximum sewing speed setting
- 6Aligning the embroidering position using the embroidery positioning sticker
- 7How do I manually specify or manage the thread colors assigned to each needle bar?
- 8Why does the upper thread keep breaking?
- 9How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 10How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 11How to Embroider on Pet Collar. [Video instructions]
- 12Setting the machine to stop at color changes
- 13Basting Embroidery
- 14How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 15How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 16How to Embroider on Clothes. [Video instructions]
- 17How to Embroider on Shoes. [Video instructions]
- 18How to Embroider on Bag. [Video instructions]
- 19How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 20Reserved needle bar and sewing speed settings
- 21Specifying jumpstitch trimming or DST jump codes for trimming
- 22Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 23How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 24How do I specify the starting position or the ending position of embroidering?
- 25How to set up the cap frame. [Video instructions]
- 26There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 27Maintenance (Cleaning the bobbin case) [ Video ]
- 28Maintenance (Clean the hook) [ Video ]
- 29Maintenance (Cleaning the bobbin case)
- 30"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 31How to use the Round frame (PRPRFK1) [Video instructions]
- 32How do I set the machine to trim the threads between the characters?
- 33Colors of Tajima (.dst) embroidery data
- 34Maintenance (Cleaning around the needle plate) [ Video ]
- 35Maintenance (Oiling the machine) [ Video ]
- 36"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 37What is Wiper ?
- 38"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 39How do I resume embroidering after turning off the machine ?
- 40How to use the the versatile magnetic frame [Video instructions]
- 41The thread tension is incorrect.
- 42Embroidery pattern does not sew out correctly.
- 43How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 44How to Embroider on Cap. [Video instructions]
- 45How do I thread the machine? (Threading the upper thread)
- 46"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 47How to set up the cap frame driver. [Video instructions]
- 48How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 49How do I delete short stitches ?
- 50How do I check the thread tension ?