FAQs & Troubleshooting
Popular |
56 Results
- 1Basic operations and embroidery functions [Video instructions]
- 2Touch panel is malfunctioning.
- 3How do I adjust thread tension for embroidering?
- 4How do I wind the bobbin?
- 5How do I hoop the fabric in the embroidery frame?
- 6How do I thread the machine (Threading the upper thread)?
- 7How do I restart embroidering if the thread breaks or the bobbin runs out of thread during embroidering?
- 8How do I attach or remove the embroidery frame ?
- 9How do I set the bobbin?
- 10How do I change the needle ?
- 11Embroidery
- 12It is difficult to remove the needle plate cover from the machine. (How do I remove the needle plate cover from the machine?)
- 13Tips for getting better embroidery results
- 14How do I adjust the sensitivity of the operation keys?
- 15How do I retrieve embroidery patterns saved in the machine's memory or a USB flash drive?
- 16How do I remove or attach the Embroidery foot ?
- 17Fabric puckers
- 18How do I clean the race?
- 19Needle breaks.
- 20"F02" appears on the LCD. What does it mean?
- 21Stitches are skipped
- 22"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 23Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 24"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 25Upper thread breaks.
- 26Where do I put the oil in my machine?
- 27"This pattern cannot be used." message appears on the LCD. What does it mean?
- 28"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
- 29"F06" appears on the LCD. What does it mean?
- 30"F05" appears on the LCD. What does it mean?
- 31"F04" appears on the LCD. What does it mean?
- 32"F03" appears on the LCD. What does it mean?
- 33"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 34"Preventive maintenance is recommended." ppears on the LCD.
- 35"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 36"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 37When the thread became tangled under the bobbin winder seat
- 38How do I attach or remove the Embroidery Unit?
- 39"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 40How to change the needle stop position
- 41Bobbin thread breaks
- 42"Not enough available memory to save." message appears on the LCD. What does it mean?
- 43"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 44"The bobbin thread is almost empty." message appears on the LCD during embroidering and the machine has stopped. What does it mean?
- 45"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 46How to use the memory function to save embroidery patterns
- 47"F07" appears on the LCD. What does it mean?
- 48"F01" appears on the LCD. What does it mean?
- 49"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 50"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?