FAQs & Troubleshooting
Popular |
109 Results
- 1How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 2How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 3How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 4How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 5Fabric and Thread
- 6How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 7How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 8"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 9How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
- 10How to use the Binding Buttonhole Foot 1. (Optional accessory : SA105 / F083) [Video instructions]
- 11How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 12How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 13How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 14How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 15How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 16How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
- 17How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 18How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 19How do I wind the bobbin?
- 20"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 21"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 22How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 23The machine does not make stitches
- 24How to use the Needle Felting Foot. (Optional accessory : SA280/ NFAHS1) [Video instructions]
- 25How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 26"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
- 27"OK to delete the setting?" message appears on the LCD. What does it mean?
- 28"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 29How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 30How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 31How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
- 32How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 33How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
- 34How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 35How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 36How do I create a space between characters?
- 37"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 38"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 39"USB media error" message appears on the LCD. What does it mean?
- 40"This USB media cannot be used." message appears on the LCD. What does it mean?
- 41How do I clean the race?
- 42Combination of fabric, thread and needle
- 43"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- 44"Transmitting by USB" message appears on the LCD. What does it mean?
- 45"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 46"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 47"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 48The thread tension is incorrect.
- 49How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
- 50How to use the Advanced Monogramming foot "N+" (Optional accessory : SA216 / F087 / F087AP) [Video instructions]