FAQs & Troubleshooting
Popular |
67 Results
- 1How do I adjust the clock on the display?
- 2How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 3"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 4"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 5How do I change the needle ?
- 6How do I set the bobbin ?
- 7"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 8"USB media error" message appears on the LCD. What does it mean?
- 9"This file cannot be used." message appears on the LCD. What does it mean?
- 10"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 11"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 12"OK to revert to the original position and/or angle?" message appears on the LCD. What does it mean?
- 13How do I specify the embroidering location with the sensor pen? (Specifying the embroidery pattern location by selecting the pattern center with the sensor pen.)
- 14"This USB media cannot be used." message appears on the LCD. What does it mean?
- 15When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 16How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 17How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 18How to use the Multi-purpose Screwdriver.
- 19How do I specify the embroidering location with the sensor pen?(Specifying the embroidery pattern location by selecting the pattern edge with the sensor pen.)
- 20If the thread breaks during sewing.
- 21"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?
- 22"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 23"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 24"The pattern field extends out of the pattern area, repeat setting the position and angle using the sensor pen." message appears on the LCD. What does it mean?
- 25"The needle will move. Keep your hands etc. away from the needle area." message appears on the LCD. What does it mean?
- 26"Set the clock." message appears on the LCD. What does it mean?
- 27"Sensor module error." message appears on the LCD. What does it mean?
- 28"OK to reset the pattern’s border setting, position and/or angle?" message appears on the LCD. What does it mean?
- 29"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 30"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 31"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
- 32"Failed to save file." message appears on the LCD. What does it mean?
- 33How do I change the volume of operation sounds or alarm sounds?
- 34How do I calibrate the sensor pen?
- 35How do I attach or remove the embroidery frame ?
- 36How do I remove or attach the Embroidery foot ?
- 37How do I attach or remove the Embroidery Unit?
- 38How do I thread my machine ?
- 39Where do I put the oil in my machine?
- 40How do I wind the bobbin?
- 41How do I create a space between characters?
- 42"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 43"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 44"This USB media is incompatible." message appears on the LCD. What does it mean?
- 45"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 46"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 47"Transmitting by USB" message appears on the LCD. What does it mean?
- 48"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 49"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 50"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?