FAQs & Troubleshooting
Popular |
68 Results
- 1How to use the Multi-purpose Screwdriver.
- 2How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 3How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 4How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 5Embroidery
- 6"This USB media cannot be used." message appears on the LCD. What does it mean?
- 7"Preventive maintenance is recommended" appears on the LCD.
- 8How do I specify the embroidering location with the sensor pen? (Specifying the embroidery pattern location by selecting the pattern center with the sensor pen.)
- 9How do I attach or remove the Embroidery Unit?
- 10How do I thread my machine ?
- 11When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 12Where do I put the oil in my machine?
- 13How do I wind the bobbin?
- 14How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 15Why is the outline sewing off the pattern?
- 16"Sensor module error." message appears on the LCD. What does it mean?
- 17"OK to revert to the original position and/or angle?" message appears on the LCD. What does it mean?
- 18How do I attach or remove the embroidery frame ?
- 19How do I adjust the clock on the display?
- 20How do I change the needle ?
- 21"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 22"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 23Upper threading (Point)
- 24"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 25"This file cannot be used." message appears on the LCD. What does it mean?
- 26"The needle will move. Keep your hands etc. away from the needle area." message appears on the LCD. What does it mean?
- 27"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 28How do I calibrate the sensor pen?
- 29"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 30"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 31How do I clean the race?
- 32When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 33Why does the lower thread keep breaking?
- 34"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?
- 35"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 36"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 37"OK to reset the pattern’s border setting, position and/or angle?" message appears on the LCD. What does it mean?
- 38"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 39"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 40"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 41"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 42"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 43"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 44"Attach the embroidery frame." message appears on the LCD. What does it mean?
- 45If the thread breaks during sewing.
- 46"Set the clock." message appears on the LCD. What does it mean?
- 47"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 48"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
- 49How do I change the volume of operation sounds or alarm sounds?
- 50How do I remove or attach the Embroidery foot ?