FAQs & Troubleshooting
![]() |
Popular |
120 Results
- 1How do I adjust a stitch width or length?
- 2How to adjust the thread tension
- 3How do I sew with the twin needle?
- 4Combination of fabric, thread and needle
- 5Stitches are skipped
- 6How do I hoop the fabric in the embroidery frame?
- 7How do I adjust thread tension for embroidering?
- 8Incorrect thread tension
- 9"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 10Bobbin thread breaks
- 11Fabric puckers
- 12A broken needle has fallen into the machine.
- 13How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 14How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 15Tips for sewing thin fabrics
- 16How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
- 17The machine does not make stitches
- 18How do I adjust the sensitivity of the operation keys?
- 19How do I retrieve the patterns from the machine’s memory?
- 20How do I remove or attach the presser foot holder?
- 21How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 22How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 23Upper thread breaks.
- 24How do I edit the stitch stored in the machine with MY CUSTOM STITCH function?
- 25"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
- 26"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 27How to use the Advanced Monogramming foot "N+" (Optional accessory : SA216 / F087 / F087AP) [Video instructions]
- 28How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 29How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 30How do I save the embroidery patterns in the machine’s memory?
- 31How do I enter a line feed in the embroidery pattern?
- 32How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 33How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 34How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
- 35How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
- 36How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 37Where do I put the oil in my machine?
- 38How do I pull up the bobbin thread?
- 39"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 40"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 41Embroidery
- 42Upper thread tightened up
- 43How do I attach or remove the embroidery frame ?
- 44How do I remove or attach the Embroidery foot ?
- 45"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 46"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 47"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 48"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 49"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 50"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean and how do I clear it?