FAQs & Troubleshooting
Popular |
169 Results
- 1How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 2How to use the Multi-purpose Screwdriver.
- 3How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 4How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 5Why does the lower thread keep breaking?
- 6When thread got tangled.
- 7How do I insert the bobbin case in the machine?
- 8How do I use a prewound bobbin?
- 9Fabric and Thread
- 10Combination of fabric, thread and needle
- 11How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 12Place a spool of thread on a spool pin.
- 13The bobbin thread cannot be pulled up.
- 14How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 15How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 16How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 17How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 18How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 19It is difficult to pass the thread through the needle bar thread guide(hook).
- 20"Preventive maintenance is recommended" appears on the LCD.
- 21The machine does not make stitches
- 22How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 23How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 24How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
- 25The machine stops and displays error message "Fabric edge is not recognized at this point" while edge sewing though the stitching is not reaching near the edge of the fabric.
- 26Though touching "OK" on "Attach vertical stitch alignment foot and edge sewing sheet" window, the same window still appears.
- 27Sewing is started even though the presser foot is raised.
- 28How do I create a space between characters?
- 29How do I recall a specific embroidery pattern from the computer?
- 30When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 31How do I clean the race?
- 32How do I remove the presser foot holder?
- 33Embroidery
- 34How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 35How to use the Couching foot. (Optional accessory : SA199 / F072, SA199V / F073) [Video instructions]
- 36How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
- 37How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
- 38How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 39How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 40How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 41How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 42Where do I put the oil in my machine?
- 43What kinds of thread should I use as bobbin threads when I do embroidery?
- 44When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 45"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 46"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 47How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 48How to use the Ruffler Foot. (Optional accessory : SA143 / F051) [Video instructions]
- 49How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 50How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]