FAQs & Troubleshooting
 |
Popular |
118 Results
- 1How do I use a prewound bobbin?
- 2Combination of fabric, thread and needle
- 3How do I remove the presser foot holder?
- 4When thread got tangled.
- 5How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 6How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 7What kinds of thread should I use as bobbin threads when I do embroidery?
- 8How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 9How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 10How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 11How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
- 12How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 13It is difficult to pass the thread through the needle bar thread guide(hook).
- 14"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 15How to clean the bobbin case(pink marking or no marking) when using a prewound bobbin.
- 16When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 17Embroidery
- 18"OK to save the current settings?" message appearing on the LCD. What does it mean?
- 19How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 20How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 21How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
- 22How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 23How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 24How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 25How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
- 26How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 27How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
- 28How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
- 29How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
- 30"Lower the presser foot lever." appears on the LCD.
- 31"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 32Place a spool of thread on a spool pin.
- 33How do I attach the embroidery frame?
- 34"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 35"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 36How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 37How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
- 38How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
- 39How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
- 40How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 41How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 42How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 43Where do I put the oil in my machine?
- 44How do I create a space between characters?
- 45"This key does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 46How do I clean the race?
- 47How do I select patterns from the embroidery cards (sold separately)?
- 48F** or "F*" appears on the LCD. What does it mean?
- 49How do I save often-used patterns in the machine's memory?
- 50"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
