FAQs & Troubleshooting
Popular |
36 Results
- 1When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 2How do I retrieve a specific embroidery pattern from the computer?
- 3Embroidery
- 4Place a spool of thread on a spool pin.
- 5"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 6It is difficult to pass the thread through the needle bar thread guide(hook).
- 7"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 8How do I clean the race?
- 9How do I confirm Windows98SE?
- 10"Turn off the machine, and attach the embroidery unit." message appearing on the LCD.What does it mean?
- 11"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 12"Cannot sew on this screen." message appearing on the LCD. What does it mean?
- 13Fabrics and stabilizer material for embroidery
- 14F** or "F*" appears on the LCD. What does it mean?
- 15Where do I put the oil in my machine?
- 16"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 17Why is the outline sewing off the pattern?
- 18Upper threading (Point)
- 19How do I save often-used patterns in the machine's memory?
- 20"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 21"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 22"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
- 23"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 24"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 25How do I select patterns from the embroidery cards (sold separately)?
- 26Why does the lower thread keep breaking?
- 27"Lower the presser foot lever." appears on the LCD.
- 28"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 29"The safety device has been activated." appears on the LCD.
- 30When thread got tangled.
- 31How do I correctly install a bobbin?
- 32"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
- 33"Deleting..." message appearing on the LCD. What does it mean?
- 34"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 35"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 36"Saving..." message appearing on the LCD. What does it mean?