"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?

"No more patterns can be added to this combination." message appears on the LCD. What does it mean?

"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?

How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]

How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]

How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]

How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]

How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]

How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]

How to use the Couching foot. (Optional accessory : SA199 / F072, SA199V / F073) [Video instructions]

How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]

"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?

"Remove Dual Feed module from the machine." message appears on the LCD. What does it mean?

"OK to delete the selected picture?" message appears on the LCD. What does it mean?

"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?

"Lower the presser foot lever." message appears on the LCD. What does it mean?

"USB media error" message appears on the LCD. What does it mean?

"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?

"Cannot embroider since the embroidery unit is not attached. Turn off the machine, and then attach the embroidery unit." message appears on the LCD. What does it mean?

"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?

"Data volume is too large for this pattern." message appears on the LCD. What does it mean?

How to use the Multi-purpose Screwdriver. [ Position “3” ]

How to use the Multi-purpose Screwdriver. [ Position “1” ]

Embroidery