FAQs & Troubleshooting
![]() |
Popular |
39 Results
- 1"E7" message appearing on the stitch indicator. What does it mean and how do I clear it?
- 2Combination of fabric, thread and needle
- 3Fabric and Thread
- 4An "E3" message appears on the panel.
- 5An "E5" message appears on the panel.
- 6When thread got tangled.
- 7Where do I put the oil in my machine?
- 8I slide the stitch width adjustment slider, but I can not adjust the stitch width (zigzag width).
- 9I slide the stitch length adjustment slider, but I can not adjust the stitch length.
- 10How do I load the spool into the thread cassette?
- 11When should I use the extra spool pin?
- 12How do I remove the presser foot holder?
- 13Place a spool of thread on a spool pin.
- 14How to I attach the spool of thread to my machine?
- 15How do I manually thread the needle?
- 16"E8" message appearing on the stitch indicator. What does it mean and how do I clear it?
- 17An "E2" message appears on the panel.
- 18Why does the needle keep breaking?
- 19Why does the lower thread keep breaking?
- 20How do I sew a blind hem?
- 21How do I wind the bobbin?
- 22How do I thread the needle?
- 23It is difficult to pass the thread through the needle bar thread guide(hook).
- 24An "E6" message appears on the panel.
- 25How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 26The thread is looping when I try to wind a bobbin.
- 27How do I correctly install a bobbin?
- 28The thread tension is incorrect.
- 29How do I sew buttonholes?
- 30How do I sew an applique?
- 31My auto threader is not working. What should I do?
- 32Upper Threading (Using the twin needle)
- 33When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 34An "E1" message appears on the panel.
- 35How do I sew such as vinyl, leather, quilting layers and velvet?
- 36Why does my thread keep jamming?
- 37Why does the upper thread keep breaking?
- 38An "E4" message appears on the panel.
- 39Incorrect thread tension