FAQs & Troubleshooting
![]() |
Popular |
323 Results
- 1Mat and Material Combinations
- 2About Blade Extension, Cutting Pressure and Mat
- 3Can I create the cutting data for ScanNCut from the image data?
- 4Downloading Optional Design Pattern Collection
- 5Adjusting the Blade Extension
- 6Mat and Cutting Blade Combinations
- 7List of Error Messages for CanvasWorkspace (Others)
- 8List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 9What should I do if the scanned and cut positions are misaligned?
- 10The mat or the material catches on a feed roller during cutting/drawing.
- 11How do I Create the Cutting Data (Scan to Cut Data) ?
- 12Can I create the cutting data for ScanNCut from vector graphics data?
- 13Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 14E02006 appears on the computer screen.
- 15The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 16What type of data can my ScanNCut machine be used?
- 17E11002 appears on the computer screen.
- 18"Please register your machine." appears on the computer screen.
- 19FC1 files on USB flash drives of optional patterns cannot be imported into CanvasWorkspace.
- 20How to hide the adjustment lines and view the tracing area on Enhanced Image Tracing function. [Video]
- 21“The entered text cannot be used.“ appears on the computer screen.
- 22If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 23E10003 appears on the computer screen.
- 24E01006 appears on the computer screen.
- 25E01005 appears on the computer screen.
- 26List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
- 27Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 28Important Notice for using the Foil Transfer Starter Kit
- 29I adjust the blade extension and the cut pressure to the setting described in the Quick Reference Guide. But the result of cutting the material was not good.
- 30The mat is fed in at an angle and is not fed during cutting / drawing.
- 31Universal Pen Holder [Video]
- 32ErrS25 appears on the computer screen.
- 33E03006 appears on the computer screen.
- 34Can different types of material be attached to the same mat for cutting?
- 35E00007 appears on the computer screen.
- 36Cutting/Drawing by Tracing an Image
- 37How to adjust the output smoothing level on Enhanced Image Tracing function. [Video]
- 38How to use Enhanced Image Tracing function via Tablet. [Video]
- 39How can I transfer the created/edited data between CanvasWorkspace and my machine via a wireless network?
- 40I find some scratches outside the grid area (the attaching area) on the mat. Why is such a scratch attached on the mat?
- 41How long will the mat last?
- 42Scanning a Background Image (Background Scanning).
- 43The mat or the material catches on a feed roller when the mat is being inserted.
- 44When the mat is inserted, the attached material peels off.
- 45How to Use the Process Overlap Tool [Video]
- 46How to attach the material to the mat
- 47E99901 appears on the computer screen.
- 48E12003 appears on the computer screen.
- 49E02005 appears on the computer screen.
- 50What type of cut files and projects containing cut data other than built-in patterns are available?