FAQs & Troubleshooting
![]() |
Popular |
299 Results
- 1List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
- 2About Blade Extension, Cutting Pressure and Mat
- 3Mat and Cutting Blade Combinations
- 4What should I do if the scanned and cut positions are misaligned?
- 5The mat is fed in at an angle and is not fed during cutting / drawing.
- 6Can I create the cutting data for ScanNCut from the image data?
- 7The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 8The mat or the material catches on a feed roller during cutting/drawing.
- 9Can the Cutting mat or Scanning mat for the ScanNCut (CM series) be used in the ScanNCut DX (SDX series)?
- 10List of Error Messages for CanvasWorkspace (Others)
- 11Preparation of Craft Paper / Fabric
- 12E10005 appears on the computer screen.
- 13What is the Difference between "Pen Holder", "Universal Pen Holder" and "Small Barrel Pan Holder"?
- 14List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 15E94001 appears on the computer screen.
- 16“The entered text cannot be used.“ appears on the computer screen.
- 17ErrS07 appears on the computer screen.
- 18How to Use the Rhinestone Function on CanvasWorkspace for PC [Video]
- 19What type of data can my ScanNCut machine be used?
- 20E10003 appears on the computer screen.
- 21How do I Scan for Cutting (Direct Cut) ?
- 22The machine is turned off (Auto Shut Down).
- 23Attaching & Peeling Off the Material
- 24Downloading Optional Design Pattern Collection
- 25Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 26What type of cut files and projects containing cut data other than built-in patterns are available?
- 27Can rough material be cut?
- 28How to Activate a Premium Function on CanvasWorkspace for PC [Video]
- 29E00008 appears on the computer screen.
- 30How to Install and Uninstall the Holder
- 31I adjust the blade extension and the cut pressure to the setting described in the Quick Reference Guide. But the result of cutting the material was not good.
- 32E10001 appears on the computer screen.
- 33E10007 appears on the computer screen.
- 34E01002 appears on the computer screen.
- 35FC1 files on USB flash drives of optional patterns cannot be imported into CanvasWorkspace.
- 36Can I create the cutting data for ScanNCut from vector graphics data?
- 37"Initialization of the blade position failed. Turn the machine off." message appearing on the LCD.
- 38E11010 appears on the computer screen.
- 39ErrS99 appears on the computer screen.
- 40ErrS51 appears on the computer screen.
- 41ErrS23 appears on the computer screen.
- 42ErrS10 appears on the computer screen.
- 43ErrS04 appears on the computer screen.
- 44ErrS03 appears on the computer screen.
- 45ErrS02 appears on the computer screen.
- 46ErrS01 appears on the computer screen.
- 47E03006 appears on the computer screen.
- 48E03005 appears on the computer screen.
- 49Can different types of material be attached to the same mat for cutting?
- 50How to Use the Enhanced Image Tracing on CanvasWorkspace for PC [Video]