FAQs & Troubleshooting
Popular |
299 Results
- 1Mat and Cutting Blade Combinations
- 2About Blade Extension, Cutting Pressure and Mat
- 3Mat and Material Combinations
- 4List of Error Messages for CanvasWorkspace (Others)
- 5List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 6List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
- 7Adjusting the Blade Extension
- 8The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 9Downloading Optional Design Pattern Collection
- 10Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 11The mat is fed in at an angle and is not fed during cutting / drawing.
- 12Attaching & Peeling Off the Material
- 13The mat or the material catches on a feed roller during cutting/drawing.
- 14If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 15Can I create the cutting data for ScanNCut from the image data?
- 16How do I Scan for Cutting (Direct Cut) ?
- 17E11002 appears on the computer screen.
- 18What should I do if the scanned and cut positions are misaligned?
- 19Preparation of Craft Paper / Fabric
- 20There are deep cuts completely through the mat.
- 21ErrS10 appears on the computer screen.
- 22The Calligraphy Font in the USB Flash Drive is Not Displayed
- 23Cutting/Drawing by Tracing an Image
- 24When the mat is inserted, the attached material peels off.
- 25Background Scanning [Video]
- 26How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
- 27Can different types of material be attached to the same mat for cutting?
- 28E94005 appears on the computer screen.
- 29Care and Maintenance (Cleaning the Mat)
- 30Unwanted images are scanned.
- 31ErrS01 appears on the computer screen.
- 32E12004 appears on the computer screen.
- 33E10005 appears on the computer screen.
- 34Can rough material be cut?
- 35Can the Cutting mat or Scanning mat for the ScanNCut (CM series) be used in the ScanNCut DX (SDX series)?
- 36How to Activate a Pattern Collection on CanvasWorkspace for PC [Video]
- 37List of Error Messages
- 38How to create an account for CanvasWorkspace
- 39Important Notice for using the Foil Transfer Starter Kit
- 40How do I Create the Cutting Data (Scan to Cut Data) [Video]
- 41Replacing the Blade
- 42The mat or the material catches on a feed roller when the mat is being inserted.
- 43Region Embossing
- 44Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 45Auto Layout Function [Video]
- 46ErrS24 appears on the computer screen.
- 47What type of cut files and projects containing cut data other than built-in patterns are available?
- 48E01001 appears on the computer screen.
- 49E00004 appears on the computer screen.
- 50E90001 appears on the computer screen.