FAQs & Troubleshooting
![]() |
Popular |
33 Results
- 1How to use the Blind Stitch Foot. (Optional accessory : SA214 / SA214AP / X76590-002) [Video instructions]
- 2How to use the Gathering Foot. (Optional accessory : SA213 / X77459-001) [Video instructions]
- 3Preparation before threading
- 4How to use the Taping Foot. (Optional accessory : SA212 / X76663-001) [Video instructions]
- 5How to use the Piping Foot. (Optional accessory : SA210 / XB0241-101) [Video instructions]
- 6Oiling
- 7How to use the Pearls and Sequins Foot. (Optional accessory : SA211 / X76670-002, XB0537-001) [Video instructions]
- 8How to set the thread change assembly (Two-thread sewing)
- 9Differential feed adjustment
- 10Using the wide table
- 11Adjusting the presser foot pressure
- 12If threads break during sewing
- 13Threading the upper looper
- 14Adjusting the thread tension dials
- 15How to remove and install the needle
- 16To secure chains
- 17Threading the lower looper
- 18How to attach and remove the presser foot
- 19THREADING
- 20Retracting knife
- 21Fabric is puckered
- 22Needle
- 23Cleaning
- 24Free-arm sewing (removing bed extension)
- 25Sewing Materials, Threads and Needles Comparison Chart
- 26Stitches are not uniform
- 27Needles break
- 28The fabric does not feed through.
- 29Threading the left needle
- 30Threading the right needle
- 31How to use the thread spool cap
- 32Skipped stitches
- 33Threads break