FAQs & Troubleshooting
Popular |
33 Results
- 1How to set the thread change assembly (Two-thread sewing)
- 2How to use the Pearls and Sequins Foot. (Optional accessory : SA211 / X76670-002, XB0537-001) [Video instructions]
- 3Needles break
- 4Threading the right needle
- 5How to remove and install the needle
- 6Needle
- 7Threading the upper looper
- 8THREADING
- 9How to use the thread spool cap
- 10How to use the Taping Foot. (Optional accessory : SA212 / X76663-001) [Video instructions]
- 11How to use the Gathering Foot. (Optional accessory : SA213 / X77459-001) [Video instructions]
- 12How to use the Blind Stitch Foot. (Optional accessory : SA214 / SA214AP / X76590-002) [Video instructions]
- 13If threads break during sewing
- 14To secure chains
- 15Skipped stitches
- 16The fabric does not feed through.
- 17Preparation before threading
- 18Free-arm sewing (removing bed extension)
- 19Stitches are not uniform
- 20Threads break
- 21Threading the left needle
- 22Threading the lower looper
- 23How to use the Piping Foot. (Optional accessory : SA210 / XB0241-101) [Video instructions]
- 24Adjusting the presser foot pressure
- 25Differential feed adjustment
- 26Using the wide table
- 27How to attach and remove the presser foot
- 28Oiling
- 29Cleaning
- 30Retracting knife
- 31Sewing Materials, Threads and Needles Comparison Chart
- 32Fabric is puckered
- 33Adjusting the thread tension dials