FAQs & Troubleshooting
![]() |
Popular |
98 Results
- 1Combination of fabric, thread and needle
- 2How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 3How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 4"Disconnect the foot controller." message appearing on the LCD. What does it mean?
- 5How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 6How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
- 7Where do I put the oil in my machine?
- 8How do I clean the race?
- 9How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 10How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 11How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 12How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 13How do I retrieve a specific embroidery pattern from the computer?
- 14How do I raise or lower the feed dogs?
- 15How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 16How do I thread the machine (Threading the upper thread)?
- 17"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 18Place a spool of thread on a spool pin.
- 19Fabric and Thread
- 20How do I thread the needle?
- 21"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 22How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 23How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 24How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 25How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
- 26How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 27How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
- 28How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
- 29How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 30How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
- 31It is difficult to pass the thread through the needle bar thread guide(hook).
- 32"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 33"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 34"Change to the single needle mode." appears on the LCD.
- 35When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 36How do I sew buttonholes?
- 37How do I wind the bobbin?
- 38"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 39Why does the lower thread keep breaking?
- 40When thread got tangled.
- 41How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
- 42How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 43How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
- 44How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
- 45How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 46How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
- 47How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 48How do I manually thread the needle?
- 49When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 50"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?