FAQs & Troubleshooting
Popular |
64 Results
- 1How do I create a space between characters?
- 2Combination of fabric, thread and needle
- 3Why does the lower thread keep breaking?
- 4When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 5Place a spool of thread on a spool pin.
- 6How to I attach the spool of thread to my machine?
- 7It is difficult to pass the thread through the needle bar thread guide(hook).
- 8How do I remove the presser foot holder?
- 9Fabric and Thread
- 10"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 11"Turn off the power and insert an embroidery card." appears on the LCD.
- 12"Lift the buttonhole lever." appears on the LCD.
- 13"Disconnect the foot control." appears on the LCD.
- 14How do I clean the race?
- 15Embroidery
- 16How do I manually thread the needle?
- 17How do I thread the needle?
- 18How do I load the spool into the thread cassette?
- 19"This embroidery pattern can not be used on this machine." appears on the LCD.
- 20"Press needle position button to raise needle." appears on the LCD.
- 21"Twin needles can not be used for this pattern." appears on the LCD.
- 22"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 23"Insert thread cassette." message appearing on the LCD. What does it mean?
- 24How do I sew buttonholes?
- 25How do I sew an applique?
- 26Where do I put the oil in my machine?
- 27When should I use the extra spool pin?
- 28"Calculating the time required... Please wait." appears on the LCD.
- 29"Saving..." message appearing on the LCD. What does it mean?
- 30"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 31"No more stitches can be combined." message appearing on the LCD. What does it mean?
- 32"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 33"This button does not operate when the embroidery unit is not attached." message appearing on the LCD. What does it mean?
- 34"Delete the selected pattern." appears on the LCD.
- 35"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 36"Press the back key to return to the screen to sew." appears on the LCD.
- 37Why does the needle keep breaking?
- 38How do I wind the bobbin?
- 39Upper Threading (Using the twin needle)
- 40"Lower the presser foot lever." appears on the LCD.
- 41When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 42"Saved on another embroidery card." appears on the LCD.
- 43"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 44"Saved on an embroidery card." appears on the LCD.
- 45"Selected a pattern." appears on the LCD.
- 46"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 47"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 48"Lower the buttonhole lever." appears on the LCD.
- 49"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 50Why does my thread keep jamming?