FAQs & Troubleshooting
Popular |
132 Results
- 1Tutorial videos on how to use the machine [Video instructions]
- 2Changing the embroidering position and Adjusting the angle
- 3Displaying the fabric on the LCD when aligning the embroidering position
- 4How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 5How to set up the cap frame driver. [Video instructions]
- 6How do I manually specify or manage the thread colors assigned to each needle bar?
- 7How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 8How to Embroider on Bag. [Video instructions]
- 9Aligning the embroidering position using the built-in camera
- 10How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 11How to use the the versatile magnetic frame [Video instructions]
- 12How to Embroider on Clothes. [Video instructions]
- 13How to Embroider on Pet Collar. [Video instructions]
- 14Basting Embroidery
- 15Aligning the embroidering position using the embroidery positioning sticker
- 16Maximum sewing speed setting
- 17How to Embroider on Shoes. [Video instructions]
- 18Maintenance (Oiling the machine) [ Video ]
- 19Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 20Maintenance (Cleaning the bobbin case) [ Video ]
- 21Maintenance (Clean the hook) [ Video ]
- 22Why does the upper thread keep breaking?
- 23How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 24How to use the Round frame (PRPRFK1) [Video instructions]
- 25How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 26How to set up the cap frame. [Video instructions]
- 27How to Embroider on Cap. [Video instructions]
- 28Maintenance (Cleaning around the needle plate) [ Video ]
- 29Reserved needle bar and sewing speed settings
- 30There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 31Maintenance (Cleaning the bobbin case)
- 32How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 33How do I specify the starting position or the ending position of embroidering?
- 34Temporary needle bar setting
- 35The thread tension is incorrect.
- 36"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 37How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 38Colors of Tajima (.dst) embroidery data
- 39What is Wiper ?
- 40How do I set the machine to trim the threads between the characters?
- 41Specifying jumpstitch trimming or DST jump codes for trimming
- 42Loops appear on the surface of the fabric when embroidering.
- 43"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 44Convenience of the manual color sequence
- 45How do I adjust the tension of the bobbin thread ?
- 46Setting the machine to stop at color changes
- 47How do I delete short stitches ?
- 48The bobbin thread breaks.
- 49"Check upper and bobbin thread." message appears on the LCD. What does it mean?
- 50How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]