FAQs & Troubleshooting
![]() |
Popular |
49 Results
- 1Embroidery
- 2How do I enter a line feed in the embroidery pattern?
- 3"Preventive maintenance is recommended" appears on the LCD.
- 4How do I adjust thread tension for embroidering?
- 5How do I hoop the fabric in the embroidery frame?
- 6How do I save the embroidery patterns in the machine’s memory?
- 7How do I change the font type in the embroidery pattern?
- 8How do I attach or remove the embroidery frame ?
- 9How do I remove or attach the Embroidery foot ?
- 10How do I remove or attach the presser foot ?
- 11How do I thread the machine (Threading the upper thread)?
- 12Fabric puckers
- 13Stitches are skipped
- 14How do I set the bobbin ?
- 15Where do I put the oil in my machine?
- 16"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 17"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 18Needle breaks.
- 19"There is a pattern included that cannot be saved to USB media. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 20"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 21"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 22How do I change the needle ?
- 23How do I wind the bobbin?
- 24"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 25"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 26"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 27Upper thread breaks.
- 28Bobbin thread breaks
- 29"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 30Tutorial videos on how to use the machine [Video instructions]
- 31How do I adjust the sensitivity of the operation keys?
- 32How do I retrieve the patterns from the machine’s memory?
- 33How do I edit a single letter in the embroidery pattern?
- 34"Not enough available memory to save." message appears on the LCD. What does it mean?
- 35"F**" appears on the LCD. What does it mean?
- 36"Selected pattern field extends to the outside of the embroidery frame." message appears on the LCD. What does it mean?
- 37"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
- 38"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 39How do I attach or remove the Embroidery Unit?
- 40"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 41"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?
- 42"USB media error" message appears on the LCD. What does it mean?
- 43"This USB media cannot be used." message appears on the LCD. What does it mean?
- 44"Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean and how do I clear it?
- 45"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 46"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 47"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean and how do I clear it?
- 48"This pattern cannot be used." message appears on the LCD. What does it mean?
- 49How do I clean the race?