FAQs & Troubleshooting
![]() |
Popular |
101 Results
- 1Tutorial videos on how to use the machine [Video instructions]
- 2Touch panel is malfunctioning.
- 3How do I adjust thread tension for embroidering?
- 4How do I remove or attach the Embroidery foot ?
- 5The embroidery design cannot be imported to the design page on PE-DESIGN 11 from the embroidery machine via the wireless network.
- 6The embroidery design data cannot be transferred from PE-DESIGN 11 to the embroidery machine via the wireless network.
- 7How do I set the bobbin?
- 8How do I hoop the fabric in the embroidery frame?
- 9How do I change the needle ?
- 10How do I thread the machine (Threading the upper thread)?
- 11How do I wind the bobbin?
- 12The wireless network connection cannot be set up between the embroidery machine and the computer with PE-DESIGN 11.
- 13How do I adjust the sensitivity of the operation keys?
- 14How do I clean the race?
- 15How do I attach or remove the embroidery frame ?
- 16Data cannot be transferred even though the machine number has been input. (M5622201)
- 17Where do I put the oil in my machine?
- 18"Preventive maintenance is recommended." ppears on the LCD.
- 19The pattern transferred from the Artspira app does not appear on the screen of the machine
- 20"The wireless LAN access point/router cannot be detected. " message appears on the LCD. What does it mean?
- 21Bobbin thread breaks
- 22Tips for getting better embroidery results
- 23Stitches are skipped
- 24"Not enough available memory to save the pattern. Delete another pattern?." message appears on the LCD. What does it mean?
- 25"F02" appears on the LCD. What does it mean?
- 26"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 27Data cannot be saved to the machine
- 28How to change the needle stop position
- 29Fabric puckers
- 30"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 31How do I restart embroidering if the thread breaks or the bobbin runs out of thread during embroidering?
- 32"The bobbin thread is almost empty." message appears on the LCD during embroidering and the machine has stopped. What does it mean?
- 33Embroidery
- 34How to obtain and input PIN of machine
- 35M4452001 appears on the Artspira app screen.
- 36"The SSID and Network Key are incorrect." message appears on the LCD. What does it mean?
- 37"F04" appears on the LCD. What does it mean?
- 38"F03" appears on the LCD. What does it mean?
- 39"Not enough available memory to save." message appears on the LCD. What does it mean?
- 40E96001 appears on the Artspira app screen.
- 41Data cannot be saved to a USB flash drive
- 42About the contents and data treated by Artspira app
- 43Introducing the Brother Artspira application
- 44M5622201 appears on the Artspira app screen.
- 45"The wireless security information (Authentication method, Encryption method, Network Key) is incorrect." message appears on the LCD. What does it mean?
- 46"F07" appears on the LCD. What does it mean?
- 47"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
- 48"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 49I cannot view the Cutting and Embroidery Designs using the [AR function]. (AndroidTM Device only)
- 50M5612301 appears on the Artspira app screen.