FAQs & Troubleshooting
Popular |
56 Results
- 1How do I adjust thread tension for embroidering?
- 2Basic operations and embroidery functions [Video instructions]
- 3How to use the memory function to save embroidery patterns
- 4Touch panel is malfunctioning.
- 5How do I wind the bobbin?
- 6How do I set the bobbin?
- 7How do I remove or attach the Embroidery foot ?
- 8How do I thread the machine (Threading the upper thread)?
- 9How do I hoop the fabric in the embroidery frame?
- 10How do I restart embroidering if the thread breaks or the bobbin runs out of thread during embroidering?
- 11How do I change the needle ?
- 12How do I adjust the sensitivity of the operation keys?
- 13Stitches are skipped
- 14How do I attach or remove the embroidery frame ?
- 15Tips for getting better embroidery results
- 16How do I retrieve embroidery patterns saved in the machine's memory or a USB flash drive?
- 17It is difficult to remove the needle plate cover from the machine. (How do I remove the needle plate cover from the machine?)
- 18How do I clean the race?
- 19"F01" appears on the LCD. What does it mean?
- 20Where do I put the oil in my machine?
- 21"This pattern cannot be used." message appears on the LCD. What does it mean?
- 22How to change the needle stop position
- 23Upper thread breaks.
- 24Bobbin thread breaks
- 25"F03" appears on the LCD. What does it mean?
- 26"USB media error" message appears on the LCD. What does it mean?
- 27Needle breaks.
- 28"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 29"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 30"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 31"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 32"Not enough available memory to save." message appears on the LCD. What does it mean?
- 33"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 34"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 35Fabric puckers
- 36"F06" appears on the LCD. What does it mean?
- 37"F02" appears on the LCD. What does it mean?
- 38"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
- 39"Preventive maintenance is recommended." ppears on the LCD.
- 40Embroidery
- 41"F04" appears on the LCD. What does it mean?
- 42Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 43"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 44"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
- 45When the thread became tangled under the bobbin winder seat
- 46"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 47"Not enough available memory to save the pattern. Delete another pattern?." message appears on the LCD. What does it mean?
- 48"The bobbin thread is almost empty." message appears on the LCD during embroidering and the machine has stopped. What does it mean?
- 49"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 50"F07" appears on the LCD. What does it mean?