FAQs & Troubleshooting
![]() |
Popular |
71 Results
- 1How do I thread my machine (Threading the upper thread). [Video instructions]
- 2Why is the outline sewing off the pattern?
- 3Fabric and Thread
- 4How to set up the cap frame driver. [Video instructions]
- 5There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 6How to set up the cap frame. [Video instructions]
- 7How do I thread the needle. [Video instructions]
- 8"Floppy disk write protect." message appearing on the LCD. What does it mean and how do I clear it?
- 9How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 10Why won't the tension set on my sewing machine?
- 11"Preventive maintenance is recommended" appears on the LCD.
- 12"No disk inserted or this disk may be defective." message appearing on the LCD. What does it mean and how do I clear it?
- 13Why cannot the needle threader be used?
- 14How do I install the bobbin wound with thread
- 15When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 16"Inappropriate needle stop position." message appearing on the LCD. What does it mean and how do I clear it?
- 17"Floppy disk erase error." message appearing on the LCD. What does it mean and how do I clear it?
- 18When thread got tangled
- 19Maintenance (Oiling the machine)
- 20"Impossible to reserve this needle." message appearing on the LCD. What does it mean and how do I clear it?
- 21"Wiper error." message appearing on the LCD. What does it mean and how do I clear it?
- 22Embroidery
- 23"Embroidery card read error." message appearing on the LCD. What does it mean and how do I clear it?
- 24"USB read error." message appearing on the LCD. What does it mean and how do I clear it?
- 25"CompactFlash Card erase error." message appearing on the LCD. What does it mean and how do I clear it?
- 26"Floppy disk was changed." message appearing on the LCD. What does it mean and how do I clear it?
- 27"Check if thread is broken." message appearing on the LCD. What does it mean and how do I clear it?
- 28"Needle bar case position error." message appearing on the LCD. What does it mean and how do I clear it?
- 29"Impossible to add any more character." message appearing on the LCD. What does it mean and how do I clear it?
- 30Fabric/stabilizer compatibility chart
- 31How do I create a space between characters?
- 32"Impossible to set the start & the end points." message appearing on the LCD. What does it mean and how do I clear it?
- 33"Save error." message appearing on the LCD. What does it mean and how do I clear it?
- 34"Stop while needle bar case transferring." message appearing on the LCD. What does it mean and how do I clear it?
- 35Why does the needle keep breaking?
- 36How do I confirm Windows98SE?
- 37Maintenance (Cleaning the bobbin case)
- 38"Needle threader is in threading position." message appearing on the LCD. What does it mean and how do I clear it?
- 39"Maximum number of patterns have been combined." message appearing on the LCD. What does it mean and how do I clear it?
- 40"Picker error." message appearing on the LCD. What does it mean and how do I clear it?
- 41Why does my thread keep jamming?
- 42"The thread number is invalid." message appearing on the LCD. What does it mean and how do I clear it?
- 43"Change to the big frame." message appearing on the LCD. What does it mean and how do I clear it?
- 44"This pattern contains too much data to be stored." message appearing on the LCD. What does it mean and how do I clear it?
- 45"Pocket read error." message appearing on the LCD. What does it mean and how do I clear it?
- 46"Can not use this disk." message appearing on the LCD. What does it mean and how do I clear it?
- 47"Check if lower thread is broken." message appearing on the LCD. What does it mean and how do I clear it?
- 48"Needle bar case home position error." message appearing on the LCD. What does it mean and how do I clear it?
- 49Why won't the machine pick up the bobbin thread?
- 50"Characters cannot be aligned." message appearing on the LCD. What does it mean and how do I clear it?