FAQs & Troubleshooting
Popular |
98 Results
- 51How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 52How do I manually thread the needle?
- 53How do I retrieve a specific embroidery pattern from the computer?
- 54"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 55"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 56"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 57"OK to save the current settings?" message appearing on the LCD. What does it mean?
- 58"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 59"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 60The thread tension is incorrect.
- 61Why does the upper thread keep breaking?
- 62Upper threading (Point)
- 63How do I correctly install a bobbin?
- 64"Lower the presser foot lever." appears on the LCD.
- 65When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 66"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 67"Saving..." message appearing on the LCD. What does it mean?
- 68"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 69"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 70"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 71"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 72"Change to the single needle mode." appears on the LCD.
- 73How do I select patterns from the embroidery cards (sold separately)?
- 74Why is the outline sewing off the pattern?
- 75Why does the needle keep breaking?
- 76Fabrics and stabilizer material for embroidery
- 77Incorrect thread tension
- 78For better results when sewing stretch fabrics
- 79How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
- 80How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 81How do I save often-used patterns in the machine's memory?
- 82How do I wind the bobbin?
- 83With free-motion quilting, skipped stitches or needle breakage occur
- 84It is difficult to pass the thread through the needle bar thread guide(hook).
- 85"Turn off the machine, and attach the embroidery unit." message appearing on the LCD. What does it mean?
- 86"Selected a pattern." appears on the LCD.
- 87"Lift the buttonhole lever." appears on the LCD.
- 88"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 89"Cannot sew on this screen." message appearing on the LCD. What does it mean?
- 90How do I clean the race?
- 91How do I remove the presser foot holder?
- 92How do I confirm Windows98SE?
- 93When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 94Why does my thread keep jamming?
- 95How do I sew buttonholes?
- 96How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 97How do I sew such as vinyl, leather, quilting layers and velvet?
- 98Embroidery