FAQs & Troubleshooting
Popular |
107 Results
- 51How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 52How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 53How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 54How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
- 55How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 56How do I manually thread the needle?
- 57When can we use Standard GREEN Marked Bobbin Case?
- 58"This key does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 59"Retrieving the pattern. Wait a moment." message appearing on the LCD. What does it mean?
- 60"Deleting..." message appearing on the LCD. What does it mean?
- 61"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 62"Saving..." message appearing on the LCD. What does it mean?
- 63"Data volume is too large for this pattern." message appearing on the LCD. What does it mean?
- 64"Insert an embroidery card." message appearing on the LCD. What does it mean?
- 65How do I raise or lower the feed dogs?
- 66How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 67How do I sew such as vinyl, leather, quilting layers and velvet?
- 68Fabrics and stabilizer material for embroidery
- 69With free-motion quilting, skipped stitches or needle breakage occur
- 70When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 71"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 72"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 73"Disconnect the foot controller." message appearing on the LCD. What does it mean?
- 74"Turn off the machine, and attach the embroidery unit." message appearing on the LCD. What does it mean?
- 75"This embroidery pattern can not be used on this machine." message appearing on the LCD. What does it mean?
- 76"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 77"No more stitches can be combined." message appearing on the LCD. What does it mean?
- 78"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 79"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 80"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 81How do I select patterns from the embroidery cards (sold separately)?
- 82The thread tension is incorrect.
- 83Why does the upper thread keep breaking?
- 84How do I sew an applique?
- 85Upper threading (Point)
- 86How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 87How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 88How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 89How do I thread the twin needle?
- 90"Lower the presser foot lever." appears on the LCD.
- 91"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
- 92"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 93"OK to save the current settings?" message appearing on the LCD. What does it mean?
- 94"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 95"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 96"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 97"Selected a pattern." appears on the LCD.
- 98"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 99"Lower the buttonhole lever." appears on the LCD.
- 100"Lift the buttonhole lever." appears on the LCD.