FAQs & Troubleshooting
![]() |
Popular |
127 Results
- 51When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 52"Preventive maintenance is recommended" appears on the LCD.
- 53How do I attach or remove the Embroidery Unit?
- 54When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 55How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
- 56How to use the Needle Felting Foot. (Optional accessory : SA280/ NFAHS1) [Video instructions]
- 57How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 58"Remove Dual Feed module from the machine." message appears on the LCD. What does it mean?
- 59"OK to delete the setting?" message appears on the LCD. What does it mean?
- 60How do I adjust the clock on the display?
- 61How do I attach the walking foot ?
- 62How do I set the bobbin ?
- 63How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 64How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
- 65How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 66Why does the needle keep breaking?
- 67How do I remove or attach the presser foot holder?
- 68"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 69"Failed to save file." message appears on the LCD. What does it mean?
- 70How do I remove or attach the presser foot ?
- 71How do I thread my machine when using the twin needle mode ?
- 72"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- 73"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 74"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 75Why is the outline sewing off the pattern?
- 76How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 77How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 78How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 79If the thread breaks during sewing.
- 80"This key cannot be used at this time." message appears on the LCD. What does it mean?
- 81"This file cannot be used." message appears on the LCD. What does it mean?
- 82"Set the clock." message appears on the LCD. What does it mean?
- 83How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 84"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 85"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 86The thread tension is incorrect.
- 87How do I sew buttonholes?
- 88How do I sew an applique?
- 89For better results when sewing stretch fabrics
- 90"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
- 91"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 92"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 93How do I change the volume of operation sounds or alarm sounds?
- 94How do I change the needle ?
- 95How do I thread my machine ?
- 96"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 97"This USB media is incompatible." message appears on the LCD. What does it mean?
- 98"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 99"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 100"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.