FAQs & Troubleshooting
Popular |
125 Results
- 51The machine does not make stitches
- 52A broken needle has fallen into the machine.
- 53How do I edit the stitch stored in the machine with MY CUSTOM STITCH function?
- 54How do I save the embroidery patterns in the machine’s memory?
- 55How do I enter a line feed in the embroidery pattern?
- 56How do I change the font type in the embroidery pattern?
- 57How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
- 58How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
- 59When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 60"Preventive maintenance is recommended" appears on the LCD.
- 61Tips for sewing leathers or vinyl fabrics.
- 62How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 63How do I retrieve the patterns from the machine’s memory?
- 64How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 65How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 66How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 67How do I thread the machine (Threading the upper thread)?
- 68"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 69Machine does not start to sew.
- 70Incorrect thread tension
- 71"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 72"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 73"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean and how do I clear it?
- 74"This pattern cannot be used." message appears on the LCD. What does it mean?
- 75"This pattern cannot be loaded as the pattern extends out of the editable area." message appears on the LCD. What does it mean?
- 76"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
- 77How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 78How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 79"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 80"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 81"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 82Embroidery
- 83Fabric is caught in the machine and cannot be removed
- 84"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 85"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 86"There is a pattern included that cannot be saved to USB media. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 87How do I remove or attach the Embroidery foot ?
- 88How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 89"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?
- 90"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 91"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 92When the thread became tangled under the bobbin winder seat
- 93"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 94How do I attach or remove the Embroidery Unit?
- 95How do I remove or attach the presser foot ?
- 96"Turn off the power and replace the needle plate." appears on the LCD.
- 97"USB media error" message appears on the LCD. What does it mean?
- 98"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 99"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 100"Not enough available memory to save." message appears on the LCD. What does it mean?