PC-6500
FAQs & Troubleshooting |
29 Results
Sort by
- 106/04/2018"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 203/31/2016"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 303/31/2016"Raise the needle to high position." message appearing on the LCD. What does it mean?
- 403/31/2016"This key does not work when needle is at low position. Raise the needle to high position and touch key again." message appearing on the LCD. What does it mean and how do I clear it?
- 503/31/2016"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 604/07/2009"Lower the presser foot lever." appears on the LCD.
- 710/31/2006"Embroidery arm will start moving. Keep your hands, etc. away from arm." message appearing on the LCD. What does it mean?
- 810/31/2006"Selected embroidery pattern exceeds size of large frame." message appearing on the LCD. What does it mean?
- 910/31/2006"Saved on another card." message appearing on the LCD. What does it mean?
- 1010/31/2006"This card cannot be used." message appearing on the LCD. What does it mean?
- 1110/31/2006"Card is not inserted. Turn off power and insert card." message appearing on the LCD. What does it mean?
- 1210/31/2006"Saved on a card." message appearing on the LCD. What does it mean?
- 1310/31/2006"Pattern is too big for large frame. To add more patterns, rotate this pattern." message appearing on the LCD. What does it mean?
- 1410/31/2006"Foot controller will not work while embroidery unit is attached. Remove foot controller." message appearing on the LCD. What does it mean?
- 1510/31/2006"Turn off power and remove embroidery unit before using this button." message appearing on the LCD. What does it mean?
- 1610/31/2006"This button will not work while embroidery unit is attached." message appearing on the LCD. What does it mean?
- 1710/31/2006"This button will not work when embroidery unit is not attached. Turn off power and attach embroidery unit." message appearing on the LCD. What does it mean?
- 1810/31/2006"Lower buttonhole lever(1)." message appearing on the LCD. What does it mean?
- 1910/31/2006"Raise buttonhole lever(1)." message appearing on the LCD. What does it mean?
- 2010/31/2006"Start/Stop button does not work when foot control is connected. Disconnect foot control." message appearing on the LCD. What does it mean?
- 2110/31/2006"Saving" message appearing on the LCD. What does it mean?
- 2210/31/2006"No more stitches can be combined." message appearing on the LCD. What does it mean?
- 2310/31/2006"Complete pattern entry." message appearing on the LCD. What does it mean?
- 2410/31/2006"This pattern can not be saved in the memory." message appearing on the LCD. What does it mean?
- 2510/31/2006"No pattern is memorized." message appearing on the LCD. What does it mean?
- 2610/31/2006"Check if thread is entangled. Check if needle is bent." message appearing on the LCD. What does it mean?
- 2710/31/2006"Check if upper or lower thread is cut." message appearing on the LCD. What does it mean and how do I clear it?
- 2810/31/2006"Select pattern." message appearing on the LCD. What does it mean?
- 2910/31/2006"Return bobbin winding shaft to left." message appearing on the LCD. What does it mean?