HL-3180CDW
 |
FAQs & Troubleshooting |
41 Results
Sort by:
- 112/19/2022I just replaced the toner cartridge and the LCD continues to display the message "Toner Life End" or "Replace Toner".
- 209/30/2021I still receive the error message "Replace DrumX" or "Drum End SoonX" after I replace the drum unit with a new one.
- 307/10/2019Replace Drum
- 402/05/2019The LCD displays an error code when I use Web icon (Brother Web Connect).
- 512/12/2018Cover is Open
- 606/29/2018No Waste Toner
- 706/29/2018Short Paper
- 806/29/2018No Belt Unit
- 902/24/2017Calibrate or Calibration Failed or Calibration.
- 1003/25/2016Scan Unable xx
- 1106/22/2015Cartridge Error
- 1209/19/2014No Tray
- 1309/19/2014Print Unable XX
- 1409/19/2014Replace Fuser
- 1509/16/2014Registration or Registration failed.
- 1605/01/2014Replace PF Kit xx
- 1702/20/2014Toner Error
- 1811/21/2013Fuser Error or Self-Diagnostic
- 1903/12/2013Manual Feed
- 2002/27/2013Size mismatch
- 2102/14/2013Jam Manual Feed
- 2202/14/20132-sided Disabled
- 2302/14/2013No Toner
- 2402/14/2013No Paper
- 2502/14/2013Out of Memory
- 2602/14/2013Replace Belt
- 2701/29/2013Size Error DX or Size Error 2-sided
- 2801/29/2013Replace WT (waste toner) Box
- 2901/29/2013Jam 2-sided
- 3001/29/2013Jam Rear
- 3101/29/2013Jam Inside
- 3201/29/2013Jam Tray 1 or Jam Tray
- 3301/29/2013Replace Toner
- 3411/12/2012Log Access Error
- 3511/12/2012Drums End Soon/ Drum End Soon(X)
- 3611/02/2012Drum Error (Drum!)
- 3710/30/2012Toner Low
- 3810/25/2012Small Paper
- 3907/06/2010Belt End Soon
- 4007/06/2010WT Box End Soon
- 4107/06/2010Drum Stop
