FAQs & Troubleshooting
Popular |
34 Results
- 1Combination of fabric, thread and needle
- 2Place a spool of thread on a spool pin.
- 3Why does the lower thread keep breaking?
- 4When thread got tangled.
- 5Why does my thread keep jamming?
- 6Where do I put the oil in my machine?
- 7Fabric and Thread
- 8Embroidery
- 9How do I thread my machine?
- 10How do I create a space between characters?
- 11How do I remove the presser foot holder?
- 12How do I correctly install a bobbin?
- 13It is difficult to pass the thread through the needle bar thread guide(hook).
- 14How do I raise or lower the feed dogs?
- 15"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 16Why does the upper thread keep breaking?
- 17Why does the needle keep breaking?
- 18How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 19Fabrics and stabilizer material for embroidery
- 20Why is the outline sewing off the pattern?
- 21"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 22When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 23How do I sew an applique?
- 24"Lower the presser foot lever." appears on the LCD.
- 25How do I sew buttonholes?
- 26How do I sew such as vinyl, leather, quilting layers and velvet?
- 27"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 28Sometimes I insert a memory card or floppy disk, touch the appropriate icon, and the ULT screen blanks out, then turns back on.Sometimes the designs come up, but when I choose a design, the screen blanks out. Why is this?
- 29"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?
- 30"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 31"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?
- 32The thread tension is incorrect.
- 33How do I sew a blind hem?
- 34How do I wind the bobbin?