FAQs & Troubleshooting
![]() |
Popular |
64 Results
- 1Combination of fabric, thread and needle
- 2How do I create a space between characters?
- 3How do I clean the race?
- 4Fabric and Thread
- 5Where do I put the oil in my machine?
- 6Embroidery
- 7When thread got tangled.
- 8Place a spool of thread on a spool pin.
- 9How do I thread the needle?
- 10How do I remove the presser foot holder?
- 11It is difficult to pass the thread through the needle bar thread guide(hook).
- 12How do I wind the bobbin?
- 13How to I attach the spool of thread to my machine?
- 14My auto threader is not working. What should I do?
- 15How do I manually thread the needle?
- 16When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 17Why does my thread keep jamming?
- 18How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 19"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 20Why does the lower thread keep breaking?
- 21When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 22"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 23"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 24The thread tension is incorrect.
- 25"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 26"Delete the selected pattern." appears on the LCD.
- 27Fabrics and stabilizer material for embroidery
- 28"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 29"No more stitches can be combined." message appearing on the LCD. What does it mean?
- 30"Insert thread cassette." message appearing on the LCD. What does it mean?
- 31How do I correctly install a bobbin?
- 32How do I load the spool into the thread cassette?
- 33"Lower the presser foot lever." appears on the LCD.
- 34"Saved on another embroidery card." appears on the LCD.
- 35"Calculating the time required... Please wait." appears on the LCD.
- 36"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 37"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 38"Press the back key to return to the screen to sew." appears on the LCD.
- 39"Press needle position button to raise needle." appears on the LCD.
- 40"Change to the single needle mode." appears on the LCD.
- 41"The safety device has been activated." appears on the LCD.
- 42Why does the upper thread keep breaking?
- 43Incorrect thread tension
- 44Upper Threading (Using the twin needle)
- 45"Saving..." message appearing on the LCD. What does it mean?
- 46"This embroidery pattern can not be used on this machine." appears on the LCD.
- 47"Selected a pattern." appears on the LCD.
- 48"Twin needles can not be used for this pattern." appears on the LCD.
- 49"Disconnect the foot control." appears on the LCD.
- 50How do I sew buttonholes?