FAQs & Troubleshooting
Popular |
341 Results
- 1How to Activate an Accessory Kit* (Rhinestone, Emboss Kit, etc.) for the Cutting Machine.
- 2Downloading Optional Design Pattern Collection (My Collection Function)
- 3Mat, Cutting Blade and Material Combinations
- 4How to Activate the Calligraphy Kit
- 5List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
- 6List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 7Downloading CanvasWorkspace application and Login [Video]
- 8List of Error Messages for CanvasWorkspace (Others)
- 9ErrS02 appears on the computer screen.
- 10Changing and Deleting CanvasWorkspace login ID that is registered to your machine with CanvasWorkspace
- 11Thumbnail of the Cutting Data Is Not Displayed Correctly.
- 12How to create an account for CanvasWorkspace
- 13Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 14If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 15Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 16Data cannot be saved to a USB flash drive
- 17Support OS Information about ScanNCut Link Plug-in for Adobe® Illustrator®
- 18What should I do if the scanned and cut positions are misaligned?
- 19How to register Your Machine with CanvasWorkspace
- 20How can I cleanly cut hard and thick materials?
- 21The Exported Cut Data is Different from the Desired Data
- 22E01006 appears on the computer screen.
- 23How to connect your machine and transfer data to Artspira
- 24E03005 appears on the computer screen.
- 25N93001 appears on the computer screen.
- 26E01003 appears on the computer screen.
- 27Adjusting the Position of the Feed Roller
- 28The Calligraphy Font in the USB Flash Drive is Not Displayed
- 29How to connect my machine to a wireless network using the Setup Wizard
- 30ErrS52 appears on the computer screen.
- 31ErrS51 appears on the computer screen.
- 32ErrS09 appears on the computer screen.
- 33ErrS04 appears on the computer screen.
- 34How do I update the software of the cutting machine?
- 35Can the cutting machine cut all materials automatically with the auto blade?
- 36N11001 appears on the computer screen.
- 37E91002 appears on the computer screen.
- 38E03001 appears on the computer screen.
- 39How to use Standard Cut Blade Holder and Deep Cut Blade Holder
- 40List of Error Messages
- 41Instructions for sending patterns created in CanvasWorkspace to the cutting machine for cutting or drawing.
- 42ErrS03 appears on the computer screen.
- 43E95001 appears on the computer screen.
- 44How Do I Perform Trial Cutting for Roll Feeder? (Test Cut)
- 45Care and Maintenance (Cleaning the Trimmer Blade)
- 46Can the Cutting mat or Scanning mat for the ScanNCut (CM series) be used in the ScanNCut DX (SDX series)?
- 47Can the cutting machine cut felt, leather and synthetic leather?
- 48Can the cutting machine make half cuts/kiss cuts?
- 49How to Use the Roll Feeder Function [Video]
- 50N10004 appears on the computer screen.