FAQs & Troubleshooting
Popular |
143 Results
- 1Tutorial videos on how to use the machine [Video instructions]
- 2How to set up the cap frame. [Video instructions]
- 3How to Embroider on Bag. [Video instructions]
- 4Maintenance (Cleaning the bobbin case) [ Video ]
- 5How to use the the versatile magnetic frame [Video instructions]
- 6How to set up the cap frame driver. [Video instructions]
- 7How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 8Introducing Brother My Stitch Monitor application
- 9How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 10How to Embroider on Clothes. [Video instructions]
- 11How to Embroider on Cap. [Video instructions]
- 12Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 13How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 14The monitoring app on the smart device receives the notification items I do not need.
- 15How to use the Round frame (PRPRFK1) [Video instructions]
- 16How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 17Tutorial videos on how to use My Stitch Monitor with the machine [Video instructions]
- 18There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 19Maintenance (Cleaning the thread paths of the upper threads)
- 20How do I install a bobbin into the machine?
- 21"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 22How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 23The App shows the message "Settings screen".
- 24"The wireless LAN access point/router cannot be detected. " message appears on the LCD. What does it mean?
- 25The App shows the message "No Supported Machines Found".
- 26How do I check the thread tension ?
- 27How do I adjust the tension of the bobbin thread ?
- 28How to connect your machine and transfer data to Artspira
- 29"The authentication and encryption methods used by the selected wireless LAN access point/router are not supported by your machine." message appears on the LCD. What does it mean?
- 30How do I wind the bobbin?
- 31I cannot view the Cutting and Embroidery Designs using the [AR function]. (AndroidTM Device only)
- 32How to stop "Send usage information to help improve Brother products and services"
- 33How do I delete short stitches ?
- 34How do I thread the machine? (Threading the upper thread)
- 35E92001 appears on the Artspira app screen.
- 36How do I adjust the tension of the upper thread ?
- 37How to Embroider on Pet Collar. [Video instructions]
- 38Maintenance (Cleaning around the needle plate)
- 39Introducing the Brother Artspira application
- 40"Trimming sensor error." message appears on the LCD. What does it mean?
- 41Maintenance (Cleaning the bobbin case)
- 42How do I attach Iron-On Stabilizer (Backing) to Fabric ?
- 43How to find the security information (SSID and network key) for your home network
- 44The bobbin thread breaks.
- 45How to configure administrator lock
- 46How do I use the embroidery crosshair positioning laser function to align the embroidering position?
- 47"Inappropriate needle stop position" message appears on the LCD. What does it mean?
- 48Stabilizers (Backing)
- 49M4341001 appears on the Artspira app screen.
- 50How to access setting screens (when administrator lock is enable)