FAQs & Troubleshooting
![]() |
Popular |
98 Results
- 1Tutorial videos on how to use the machine [Video instructions]
- 2How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 3Color thread table
- 4How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 5How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 6How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 7How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 8How do I use the embroidery sheet ?
- 9How to set up the cap frame driver. [Video instructions]
- 10Replacing the hook of the automatic needlethreading mechanism [Video instructions]
- 11How to use the Round frame (PRPRFK1) [Video instructions]
- 12When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 13How to set up the cap frame. [Video instructions]
- 14Replacing the needle [Video instructions]
- 15Colors of Tajima (.dst) embroidery data
- 16Embroidery pattern does not sew out correctly.
- 17Loops appear on the surface of the fabric when embroidering.
- 18Creating Beautiful Embroidery ( Hooping techniques )
- 19The thread tension is incorrect.
- 20What is DST ?
- 21"OK to delete the selected pattern?" message appears on the LCD.What does it mean?
- 22"Not enough space. Delete some patterns or use a different USB media." message appears on the LCD. What does it mean?
- 23The bobbin thread breaks.
- 24Stitches are skipped.
- 25There are needle cuts or holes in the garment.
- 26The machine is noisy while embroidering.
- 27"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
- 28"Can not recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean and how do I clear it?
- 29How do I adjust the tension of the upper thread ?
- 30How do I wind the bobbin?
- 31"Preventive maintenance is recommended" appears on the LCD.
- 32Nothing happens, even if the LCD display is pressed.
- 33The upper thread does not reach the bobbin thread when embroidering begins.
- 34How to select the "Eco Mode" or "Shutoff Support Mode" ?
- 35How do I attach Iron-On Stabilizer (Backing) to Fabric ?
- 36Why does the needle keep breaking?
- 37"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 38Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 39How do I attach or remove the embroidery frame ?
- 40How do I embroider when I use fabric that cannot have stabilizer material affixed with an iron or adhesive?
- 41Maintenance (Cleaning the bobbin case)
- 42The needle threader cannot be used.
- 43"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 44"This USB media is incompatible." message appears on the LCD. What does it mean and how do I clear it?
- 45"This USB media cannot be used." message appears on the LCD. What does it mean?
- 46"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 47"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 48"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 49"Change to a larger embroidery frame." message appears on the LCD. What does it mean?
- 50Maintenance (Clean the hook)