FAQs & Troubleshooting
Popular |
56 Results
- 1How do I adjust thread tension for embroidering?
- 2Basic operations and embroidery functions [Video instructions]
- 3How to use the memory function to save embroidery patterns
- 4Touch panel is malfunctioning.
- 5How do I wind the bobbin?
- 6How do I thread the machine (Threading the upper thread)?
- 7How do I set the bobbin?
- 8How do I hoop the fabric in the embroidery frame?
- 9How do I adjust the sensitivity of the operation keys?
- 10It is difficult to remove the needle plate cover from the machine. (How do I remove the needle plate cover from the machine?)
- 11How do I remove or attach the Embroidery foot ?
- 12How do I retrieve embroidery patterns saved in the machine's memory or a USB flash drive?
- 13How do I restart embroidering if the thread breaks or the bobbin runs out of thread during embroidering?
- 14How do I change the needle ?
- 15How do I clean the race?
- 16Stitches are skipped
- 17How do I attach or remove the embroidery frame ?
- 18How to change the needle stop position
- 19"Preventive maintenance is recommended." message appears on the LCD. What does it mean?
- 20Where do I put the oil in my machine?
- 21Upper thread breaks.
- 22"USB media error" message appears on the LCD. What does it mean?
- 23Bobbin thread breaks
- 24Embroidery
- 25Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 26"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 27Fabric puckers
- 28Needle breaks.
- 29When the thread became tangled under the bobbin winder seat
- 30"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 31"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
- 32"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 33How do I attach or remove the Embroidery Unit?
- 34"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 35"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 36"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 37"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 38"F05" appears on the LCD. What does it mean?
- 39"This USB media cannot be used." message appears on the LCD. What does it mean?
- 40"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 41Tips for getting better embroidery results
- 42"F04" appears on the LCD. What does it mean?
- 43"F03" appears on the LCD. What does it mean?
- 44"F02" appears on the LCD. What does it mean?
- 45"F01" appears on the LCD. What does it mean?
- 46"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 47"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
- 48"F07" appears on the LCD. What does it mean?
- 49"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 50"Not enough available memory to save the pattern. Delete another pattern?." message appears on the LCD. What does it mean?